[amayausers.com] Re: Design slipping
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 28 Jun 2010 19:51:11 UT
This message was posted by GailForce Designs on AmayaUsers.com. PLEASE DO NOT
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking
here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1293.html#000002
Thanks Loyda. I was able to get ahold of the digitizer last night who said to
slow the speed down from 850 to 600 which worked. But I'm now doing caps of
the same logo, but a cap file, and am having the same problem even with the
lower speed. I am using Auto Acti-Feed. If I switch to Standard for the caps,
would I still set the value at 4 or 5?
Thanks!
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
