This message was posted by Loyda on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1293.html#000001 Hi, Couple of things to try/check. Are you using Auto or Standard Acti-feed? The reason I ask is that if it is Auto, something may be triggering different tension and causing more pull on the fabric? Maybe try running it on Standard with a value of 4 or 5? The other thought, along the same lines, is that if the fabric is being pulled a little differently now than the first 2 shirts, maybe you may try using a little temporary adhesive spray on the stabilizer (assuming you are using cutaway) to keep the fabric in place better. Just a couple of things to try. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================