[amayausers.com] Re: Design slipping
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 28 Jun 2010 01:04:56 UT
This message was posted by GailForce Designs on AmayaUsers.com. PLEASE DO NOT
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking
here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1293.html
I have a design with an outline. The first two shirts stitched out perfect,
the third and fourth shirts, the stitches inside the outline stitched out
pulled in from the outline, so there is a little gap between the embroidery.
Since the first two were fine, I'm guessing its not the digitized file, but
something I'm doing with the machine? Its 9pm est and I have to do these
shirts to deliver in the morning. If there's anyone checking in on the west
coast that can help with ideas of things to check I'd appreciate it. I can
email pictures if that would help, just let me know.
Thanks!!!
Natalie
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
