[amayausers] Re: Design Shop Question
- From: "Rod & Sharon" <springer37@xxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxxxxx>
- Date: Mon, 10 May 2004 00:55:37 -0600
Lisa,
If you would care to send me the design file , I would be happy to take a
look at it for you. I'm sure that it is a simple fix.
What are you sewing it on? ie---what type of material? It sounds like a pull
comp problem to start with, but if not, some mild tweaking should fix the
problem....
Rod Springer
Melco field Tech
Boise Id
----- Original Message -----
From: "Wolf Embroidery" <Wolfemb@xxxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Sunday, May 09, 2004 2:00 PM
Subject: Re: [amayausers] Design Shop Question
> That's what I thought, but no luck. I reduced the basketball by 1% in
hopes
> that the outline would cover the area but that did not work either. It
> looks great on the PC but when I stitch it out it's off. I guess I will
> send it to a digitizer for adjustment.
>
> Thanks for trying to help.
>
> Lisa A Ridley
> Wolf Embroidery
> Wolfemb@xxxxxxxx
> ----- Original Message -----
> From: "Linen Barn" <linen@xxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxxxxx>
> Sent: Sunday, May 09, 2004 2:18 PM
> Subject: Re: [amayausers] Design Shop Question
>
>
> > Lisa,
> >
> > Just click on the outline to select it and it will show its points.
Move
> > the points out to where you want them. The worst part is that there are
> > going to be lots of point and they will be double if it is a walk stitch
> for
> > the outling. It might actually be easier to move the fill of the
> basketball
> > in.
> >
> > Aaron Sargent
> > The Linen Barn
> > linen@xxxxxxxxxxx
> > Medford, Oregon
> > ----- Original Message -----
> > From: "Wolf Embroidery" <Wolfemb@xxxxxxxx>
> > To: <amayausers@xxxxxxxxxxxxxxxx>
> > Sent: Sunday, May 09, 2004 9:57 AM
> > Subject: [amayausers] Design Shop Question
> >
> >
> > I'm trying to edit a dakota design. The basketball I'm using is not
> > stitching correctly, the outline is stitching inside the orange part of
> the
> > ball. I know there is a way to move the outline out, but can't remember
> how
> > and for the life of me can't find the instructions in the manual. Can
> > anyone help?
> >
> > Lisa A Ridley
> > Wolf Embroidery
> > Wolfemb@xxxxxxxx
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
> >
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
Other related posts:
