This message was posted by Marcelle on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/3/529.html#000003 No trim is there, just the two color changes right together and one shows the 2 beside it. The fact that there should be one color change there would mean the design would trim and then move to the next color but a trim or auto trim command does not show there. If I understand correctly from previous posts by the experts if I only define the two colors in OS that I am using in the design it would actually cause the stitchout to go back to the beginning color because it is looking for a third color. I would then have the entire design (both elements) using the same color. This being a built in lettering design with two elements it would probably be considered automatic so that may be an issue here too. Linda H., was yours auto digitized? Would anyone on the list that has Pro Plus V9 be able to try this same lettering design and see if it happens or if it is just mine? It is the Classic Monogram 'L' - 6 inches. I used the shift and L in order to get the swirl behind the letter. The first color is gold and second color is dark green. I saved the file and then clicked machine and load. When I got to OS and clicked on the color setting I saw 3 colors. The order of the colors appear gold, green and the added black last. I have not ever seen a number like that 2 after a color change before and haven't been able to find it mentioned anywhere in help. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================