[amayausers.com] Re: 4 Million Maint. Issue?
- From: e3m@xxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 10 Sep 2007 17:28:35 +0000
Mr. Springer,
My little "Pop" sounded more like a large "Crack". And to that I usually "just
say no".
I angled the ridge sideways and shoved the cavity towards the insizer which is
next to the bicuspid. I then slipped the front edge over the underside of the
back edge. And then removed the hook from the fishes mouth. I was certain it
was clear as concrete.
Any suggestions now?
The Embroidery Masters
-------------- Original message from "springer37@xxxxxxxxxxxx"
<springer37@xxxxxxxxxxxx>: --------------
Tom,
It helps greatly to leave the red pinch rollers off until last....gives you
more room to work. I have found it works best to angle the front of the cap
slightly to the left as you are inserting it. You must also angle the front
edge upward to slip it under the lip of the back edge of the cavity to hook it
on the ridge ....clear as mud, I know, but it becomes clear when you feel the
little "pop" a couple of times...
Rod Springer
Amaya Tech & Trainer
On Sat Sep 8 18:13 , 'Tom Ladow' sent:
What is the secret to get the black roller caps back on the machine after
taking them off to clean and lube the yellow rollers? I have been 30
minutes trying to get the first on back on with no luck. I just cant seem
to get the back portion to snap back into place. Any assistance will be
appreciated.
Tom Ladow
Indiana
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
---- Msg sent via CableONE.net MyMail - http://www.cableone.net The AmayaUsers
Mailing List Website: http://www.amayausers.com Discussion Board:
http://www.amayausers.com/boards Subscribe/Unsubscribe:
http://www.amayausers.com/list
Other related posts:
