[amayausers.com] Re: 4 Million Maint. Issue?
- From: "Studio 187 LLC" <InsideStudio187@xxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Mon, 10 Sep 2007 15:10:51 -0400
Tom, did you and your wife take the Amaya class in NJ early this year? I
think we trained together . . .
GF
----- Original Message -----
From: Tom Ladow
To: amayausers@xxxxxxxxxxxxx
Sent: Monday, September 10, 2007 2:18 PM
Subject: [amayausers.com] Re: 4 Million Maint. Issue?
Yes, leaving off all the red rollers work great. The step by step
instructions tell you to put the caps back on before taking the red rollers
off.this should be changed for sure. I also snapped off one of the red
rollers arms and need it replaced now. How and who does this?
Tom L.
Indiana
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of e3m@xxxxxxx
Sent: Monday, September 10, 2007 1:29 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers.com] Re: 4 Million Maint. Issue?
Mr. Springer,
My little "Pop" sounded more like a large "Crack". And to that I usually
"just say no".
I angled the ridge sideways and shoved the cavity towards the insizer which
is next to the bicuspid. I then slipped the front edge over the underside
of the back edge. And then removed the hook from the fishes mouth. I was
certain it was clear as concrete.
Any suggestions now?
The Embroidery Masters
-------------- Original message from "springer37@xxxxxxxxxxxx"
<springer37@xxxxxxxxxxxx>: --------------
Tom,
It helps greatly to leave the red pinch rollers off until last....gives you
more room to work. I have found it works best to angle the front of the cap
slightly to the left as you are inserting it. You must also angle the front
edge upward to slip it under the lip of the back edge of the cavity to hook
it on the ridge ....clear as mud, I know, but it becomes clear when you feel
the little "pop" a couple of times...
Rod Springer
Amaya Tech & Trainer
On Sat Sep 8 18:13 , 'Tom Ladow' sent:
What is the secret to get the black roller caps back on the machine after
taking them off to clean and lube the yellow rollers? I have been 30
minutes trying to get the first on back on with no luck. I just cant seem
to get the back portion to snap back into place. Any assistance will be
appreciated.
Tom Ladow
Indiana
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/ Unsubs cribe: http://www.amayausers.com/list
===========================================================
---- Msg sent via CableONE.net MyMail - http://www.cableone.net The
AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board:
http://www.amayausers.com/boards Subscribe/Unsubscribe:
http://www.amayausers.com/list
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
