[amayausers] Re: 3" Lettering on a Nylon Flag
- From: "HK Acree" <hkacree@xxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Fri, 14 Jul 2006 08:09:26 -0700
Tom,
What you may be seeing is the push/pull comp digitized into the lettering.
When you look at small to medium lettering on the screen it may not be as
evident. The 3" letters are going to show it much more. Do a sew out. Then
let us know what it looks like.
Herb
Royal Embroidery
----- Original Message -----
From: "Tom Ladow" <tcladow@xxxxxxxxxxxxxxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Friday, July 14, 2006 7:01 AM
Subject: [amayausers] 3" Lettering on a Nylon Flag
> Hi Folks;
> I have a nylon flag that my customer wants 3" high letters. I have a
> coule
> questions before I attempt this job.
> 1. How do I access the split stitch option? Is this the recommended
> stitch
> type?
>
> 2. When I entered the following letter on my Design Shop Pro+, AERIE -
> they
> are not uniform height on the screen. The A is a bit smaller, the E is a
> bit larger, the R is ok, the I is shorter, and the last E is also larger.
> When I go to 3D, it also shows all the letters at these different heights.
> If this design does sew out as shown, it will look really awful. What is
> the problem here?
>
> Thanks for any help you can give me on this.
>
> Tom LaDow
> Creative Promotions
>
>
>
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
