[AeroPAC Chat] Re: Get Your Night Launch Rockets Ready!

  • From: Gordon Balena <g_balena@xxxxxxxxxxx>
  • To: "aeropac@xxxxxxxxxxxxx" <aeropac@xxxxxxxxxxxxx>
  • Date: Sun, 29 Mar 2020 22:34:59 +0000

Well it’s not the end of the world if I don’t get to fly this one. It’s a very 
pretty little Performance Rocketry 5.5 Nike Smoke that I built years ago. But 
it’s single deployment and has a 54mm motor tube. So I was thinking that I 
might not ever fly it again. Then after seeing the night launches at last years 
XPRS I thought, night flight😊 With the K456DM motor it only goes up about 2500 
feet, so I though, perfect!

Best laid plans of mice and men…

Thanks all,
Gordon


Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

From: David Smith<mailto:davew6dps@xxxxxxxxx>
Sent: Sunday, March 29, 2020 2:42 PM
To: aeropac@xxxxxxxxxxxxx<mailto:aeropac@xxxxxxxxxxxxx>
Subject: [AeroPAC Chat] Re: Get Your Night Launch Rockets Ready!

I don't think I am really letting the cat out of the bag. There have been some 
discussions around ROC about night launching this year.

David P Smith
NAR 78668, TRA 15803, L2
Amateur Extra, W6DPS, VE and Registered Instructor
http://www.qsl.net/w6dps


On Sun, Mar 29, 2020 at 2:38 PM Jim Green 
<dmarc-noreply@xxxxxxxxxxxxx<mailto:dmarc-noreply@xxxxxxxxxxxxx>> wrote:
Waiver is good from 7am to 10pm with no stopping unless we run out of rockets 
or the weather gets bad.

On Sunday, March 29, 2020, 2:22:09 PM PDT, Gordon Balena 
<g_balena@xxxxxxxxxxx<mailto:g_balena@xxxxxxxxxxx>> wrote:



What time does afternoon flying usually stop?



Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10



From: Jim Green<mailto:dmarc-noreply@xxxxxxxxxxxxx>
Sent: Sunday, March 29, 2020 2:17 PM
To: aeropac@xxxxxxxxxxxxx<mailto:aeropac@xxxxxxxxxxxxx>
Subject: [AeroPAC Chat] Re: Get Your Night Launch Rockets Ready!



Fly it just before the sun sets.



On Sunday, March 29, 2020, 2:11:09 PM PDT, Gordon Balena 
<g_balena@xxxxxxxxxxx<mailto:g_balena@xxxxxxxxxxx>> wrote:





Oh no!! Well I guess I’m flying it during the day😊



Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10



From: Jim Green<mailto:dmarc-noreply@xxxxxxxxxxxxx>
Sent: Sunday, March 29, 2020 1:42 PM
To: aeropac@xxxxxxxxxxxxx<mailto:aeropac@xxxxxxxxxxxxx>
Subject: [AeroPAC Chat] Re: Get Your Night Launch Rockets Ready!



We have a J limit on night rockets.



On Sunday, March 29, 2020, 1:18:44 PM PDT, Gordon Balena 
<g_balena@xxxxxxxxxxx<mailto:g_balena@xxxxxxxxxxx>> wrote:





Hi,



Actually I was planning on flying my first night flier at this years XPRS. It’s 
a 5.5 Nike Smoke with 120 LED lights and an Aerotech K456DM motor. But in 
looking at your list I now have a question.

The list says electronic deployment. Is that a requirement? I was going to use 
the 14 second delay element that the motor comes with. Given the max altitude, 
RocSim shows that to be just about right.



Thanks,

Gordon



Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10



From: Jonathan DuBose<mailto:dmarc-noreply@xxxxxxxxxxxxx>
Sent: Sunday, March 29, 2020 1:09 PM
To: AeroPac Members<mailto:aeropac@xxxxxxxxxxxxx>
Subject: [AeroPAC Chat] Get Your Night Launch Rockets Ready!



Hello AEROPACERs,



For those of you who remember the spectacular night launch by ROC at last 
year's XPRS and thought it was pretty cool...here is you chance to be part of 
AEROPAC's reply.



https://www.youtube.com/watch?v=TIWtEUQvINc&feature=youtu.be  ;(Thanks Tim 
Robinson!)



So....



- If you are at least a Level 2 certified flier



- Have a 38mm or 54mm night launch rocket (or one that can be converted)



- Your rocket has electronic deployment (only apogee needed)



- Want to be part of something really cool



- Will be at XPRS this year on Saturday night



- Willing to fly an ass kicking EX sparky special propellant motor....



Start getting your rocket ready to fly now or build a new one while you 
probably have some spare time.



Demo flights at MUDROCK (or AERONAUT)





More details to follow soon.









Other related posts: