[access-uk] Re: adjusting date/time on Simbian Based Phones without sight
- From: catherineturner2007@xxxxxxxxxxxxxx
- To: access-uk@xxxxxxxxxxxxx
- Date: Thu, 5 Feb 2009 17:11:51 +0000
Hi,
So does this procedure mean you can install Talks on a brand new phone
without sighted help? I see the instructions say "if you've updated
the firmware" - what if you haven't?
Catherine
On 2/5/09, Chris Hallsworth <christopherhallsworth71@xxxxxxxxxxxxxx> wrote:
> Doesn't "I'm sorry" mean that "I disagree"?
>
> --
> Chris Hallsworth
> e-mail: christopherhallsworth71@xxxxxxxxxxxxxx
> MSN: ch9675@xxxxxxxxxxx
> Skype: chrishallsworth7266
> ----- Original Message -----
> From: "Dj Paddy" <mygroups@xxxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Wednesday, February 04, 2009 11:38 PM
> Subject: [access-uk] Re: adjusting date/time on Simbian Based Phones without
> sight
>
>
>> Chris,
>>
>> What do you mean by you're sorry?
>>
>> That is a point about the Nokia TTS, but I don't get the sorry part.
>>
>> Dj Paddy
>> Barry
>>
>> Tell me and I will hear, show me and I will see,
>> involve me and I will understand.
>>
>> Chinese Proverb
>> ----- Original Message -----
>> From: "Chris Hallsworth" <christopherhallsworth71@xxxxxxxxxxxxxx>
>> To: <access-uk@xxxxxxxxxxxxx>
>> Sent: Wednesday, February 04, 2009 11:08 PM
>> Subject: [access-uk] Re: adjusting date/time on Simbian Based Phones
>> without sight
>>
>>
>>> I'm sorry, but all versions of Talks for third edition phones will come
>>> up talking, using the Nokia TTS, after installation. So it is possible to
>>>
>>> set the software installation to all independently.
>>>
>>> --
>>> Chris Hallsworth
>>> e-mail: christopherhallsworth71@xxxxxxxxxxxxxx
>>> MSN: ch9675@xxxxxxxxxxx
>>> Skype: chrishallsworth7266
>>> ----- Original Message -----
>>> From: "Dj Paddy" <mygroups@xxxxxxxxxxxxx>
>>> To: <access-uk@xxxxxxxxxxxxx>
>>> Sent: Wednesday, February 04, 2009 10:34 PM
>>> Subject: [access-uk] adjusting date/time on Simbian Based Phones without
>>> sight
>>>
>>>
>>> Found this that Steve wrote a few years ago.
>>>
>>> Just ran with it on my phone and then plugged the phone in and got it
>>> connect to my pc suite and talks up and running now. All without sighted
>>>
>>> help.
>>>
>>>
>>> grins
>>>
>>>
>>>
>>> This describes how to adjust the date/time on Simbian based phones
>>> without vision.
>>>
>>> This is useful when installing access software such as Talks as the
>>> software is signed with a security signature.
>>>
>>> I find the quickest way to set time and date is to reformat the phone if
>>> you
>>> have already updated the firmware Type *#7370#, then Key1, then 12345
>>> followed by Key1. This is the lock code. Wait for the phone to reboot,
>>> then type immediately, lon into the first field, which sets the city to
>>> London, then Key1, then type in the current time, then Key1 then the =
>>> current
>>> date in 09022007 format, no spaces or anything, then Key1 again, then =
>>> wait
>>> for about a minute for the phone to install bits from the hard disk. =
>>> Now
>>> you should be able to install Talks.
>>>
>>> The only difficulty is if your phone defaults to setting the software to
>>> signed only. Then you really won't be able to do it without sight, or I
>>> have not found a reliable way of doing it.
>>> ** To leave the list, click on the immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** access-uk-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on the
>>> ** immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>
>>
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
