[access-uk] Re: addaware
- From: "Jillian Grant" <jillian.grant1@xxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Fri, 20 May 2005 09:26:01 +0100
Hi.
Tried that and still get the same problems. I'm wondering whether there's a
dialogue after the deletion that Jaws isn't reading. It takes 2 alt +4s to
close the prog down. I've alweady tried Insert and Escape to refresh Jaws,
and even F5 but nothing. I can't use either mouse button or tab or space or
enter to change anything. I'll be contacting the JFW lite soon to sseeif
they can shed any light on it. Adaware's been fated with me from the very
start. I couldn't install the scripts properly, so someone had to send them
to me in an installer.
----- Original Message -----
From: Barry <bbinc@xxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Thursday, May 19, 2005 2:49 PM
Subject: [access-uk] Re: addaware
> Hi Jillian
>
> I can imagine how frustrating this is for you. The programme seems to be
> acting differently on your machine than on mine. When I do the scan, jaws
> doesn't say deleting selection. Have you tried un-installing and
> re-installing it?
>
> Barry H
>
>
>
> ----- Original Message -----
> From: "Jillian Grant" <jillian.grant1@xxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Thursday, May 19, 2005 2:13 PM
> Subject: [access-uk] Re: addaware
>
>
> It's not between the next and okay, it's after the okay has been pressed.
> I'll try again and leave the pc for ages to see what happens. It's
> disconcerting though as after a few secs I don't hear it doing anything,
but
> Jaws still says deleting selection, and nothing else. confused.
>
>
> ----- Original Message -----
> From: Barry <bbinc@xxxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Thursday, May 19, 2005 11:27 AM
> Subject: [access-uk] Re: addaware
>
>
> > Hi Jillian
> >
> > Here's the exact procedure I use:
> >
> > I open Ad-aware, tab to *scan now* and press the space bar.
> > Then, when I press control n Jaws says Ad-aware personal
> > After fifteen minutes or so, I get the loud tone.
> > I then press control n and jaws says next
> > Then control m and jaws says all items checked
> > Then control n and jaws immediately says Ad-aware s e ok
> > Then I press enter and its done.
> > There is no time between pressing the last next and the ok coming up.
> > A check with the jaws cursor told me that, on this occasion, four items
> were
> > found and deleted.
> >
> > HTH
> >
> > Barry H
> >
> >
> > ----- Original Message -----
> > From: "Jillian Grant" <jillian.grant1@xxxxxxxxxxxx>
> > To: <access-uk@xxxxxxxxxxxxx>
> > Sent: Thursday, May 19, 2005 10:21 AM
> > Subject: [access-uk] Re: addaware
> >
> >
> > Barry, what should the screen be saying when you delete the files?
Using
> > Win 98SE and JFW4.5, when I hit okay to remove files, the hard drive
> starts
> > making a sound which suggests that the prog is doing its thing. But all
> > Jaws says is period, and the Jaws cursor says "Deleting selection", but
> > that's all. I can leave the prog running for ages and the screen
doesn't
> > alter. This is long after the hard drive has stopped whirring. I know
I
> > have a lot of files it wants to delete, but I can't work out when it's
> > finished. when I close the program after this, and rescan, the files
are
> > still there. There's nothing in the helpful hints on the JFW Lite site.
> It
> > just says that once you've okayed then it's finished, but doesn't seem
to
> be
> > in my case.
> >
> > Thanks and sorry for the waffle.
> >
> >
> > ----- Original Message -----
> > From: Barry <bbinc@xxxxxxxxxxxxx>
> > To: <access-uk@xxxxxxxxxxxxx>
> > Sent: Thursday, May 19, 2005 6:08 AM
> > Subject: [access-uk] Re: addaware
> >
> >
> > > Hi Karen
> > >
> > > When Ad-aware has finished it's scan and found objects, it gives a
loud
> > > bong. After this, hold down control and press n for next, then press
> > > control m for mark all and, finally, control n for next to delete all
> the
> > > objects found. You r done.
> > >
> > > Barry H
> > >
> > > ----- Original Message -----
> > > From: "Karen Burgess" <karen.burgess@xxxxxxxxxx>
> > > To: <access-uk@xxxxxxxxxxxxx>
> > > Sent: Thursday, May 19, 2005 1:33 AM
> > > Subject: [access-uk] addaware
> > >
> > >
> > > Hi all
> > >
> > > I have recently installed addaware and the jaws scrips on to my new
> > > computer. I am having trouble selecting all the objects that need to
be
> > > removed. i have tried going to the start of the list of critical
> objects,
> > > hitting the right mouse button and selecting all but it doesn't seem
to
> > > work. can anyone help?
> > >
> > > karen
> > >
> > >
> > > ** To leave the list, click on the immediately-following link:-
> > > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > > ** If this link doesn't work then send a message to:
> > > ** access-uk-request@xxxxxxxxxxxxx
> > > ** and in the Subject line type
> > > ** unsubscribe
> > > ** For other list commands such as vacation mode, click on the
> > > ** immediately-following link:-
> > > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> > > ** or send a message, to
> > > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> > >
> > >
> > >
> > > --
> > > No virus found in this incoming message.
> > > Checked by AVG Anti-Virus.
> > > Version: 7.0.308 / Virus Database: 266.11.11 - Release Date: 16/05/05
> > >
> > >
> >
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** access-uk-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> >
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** access-uk-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> >
> >
> >
> > --
> > No virus found in this incoming message.
> > Checked by AVG Anti-Virus.
> > Version: 7.0.322 / Virus Database: 266.11.12 - Release Date: 17/05/05
> >
> >
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.322 / Virus Database: 266.11.12 - Release Date: 17/05/05
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
