[access-uk] Re: addaware
- From: "Jillian Grant" <jillian.grant1@xxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Thu, 19 May 2005 14:11:49 +0100
Well, after I've pressed Control +M, it does actually say that it is about
to remove all objects, whereas before it said that no objects were selected,
so either they are all selected, or something is giving Jaws the wrong info.
But it actually says that it is in the process of deleting objects, but
doesn't move after that. I just can't work out what's happening, and it
looks like noone else can either. but I'll keep bugging everyone till I can
sort it out. I make no apology either, 'cos I don't know where else to look.
Thanks.
----- Original Message -----
From: Bruce Johnston <bruce.johnston1@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Thursday, May 19, 2005 11:39 AM
Subject: [access-uk] Re: addaware
> Hi Jill and Karen,
> Over the past few months I have found that when using addaware the use of
> control,m results in Jaws announcing that "all objects have been marked".
> However, when looked at by my wife no objects have been checked. Using
the
> application key to "select all" does not help. I have had to resort to
> asking my wife to check the objects manually, and then it works fine. I
> appreciate this is not a satisfactory solution, but it might be useful to
> check that all objects have been checked after control, m.
> I am using Jaws with scripts downloaded from JFWLite. I would welcome a
> solution to my problem as it may or may not be the same as yours.
> Regards, Bruce
> ----- Original Message -----
> From: "Jillian Grant" <jillian.grant1@xxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Thursday, May 19, 2005 10:21 AM
> Subject: [access-uk] Re: addaware
>
>
> > Barry, what should the screen be saying when you delete the files?
Using
> > Win 98SE and JFW4.5, when I hit okay to remove files, the hard drive
> starts
> > making a sound which suggests that the prog is doing its thing. But all
> > Jaws says is period, and the Jaws cursor says "Deleting selection", but
> > that's all. I can leave the prog running for ages and the screen
doesn't
> > alter. This is long after the hard drive has stopped whirring. I know
I
> > have a lot of files it wants to delete, but I can't work out when it's
> > finished. when I close the program after this, and rescan, the files
are
> > still there. There's nothing in the helpful hints on the JFW Lite site.
> It
> > just says that once you've okayed then it's finished, but doesn't seem
to
> be
> > in my case.
> >
> > Thanks and sorry for the waffle.
> >
> >
> > ----- Original Message -----
> > From: Barry <bbinc@xxxxxxxxxxxxx>
> > To: <access-uk@xxxxxxxxxxxxx>
> > Sent: Thursday, May 19, 2005 6:08 AM
> > Subject: [access-uk] Re: addaware
> >
> >
> > > Hi Karen
> > >
> > > When Ad-aware has finished it's scan and found objects, it gives a
loud
> > > bong. After this, hold down control and press n for next, then press
> > > control m for mark all and, finally, control n for next to delete all
> the
> > > objects found. You r done.
> > >
> > > Barry H
> > >
> > > ----- Original Message -----
> > > From: "Karen Burgess" <karen.burgess@xxxxxxxxxx>
> > > To: <access-uk@xxxxxxxxxxxxx>
> > > Sent: Thursday, May 19, 2005 1:33 AM
> > > Subject: [access-uk] addaware
> > >
> > >
> > > Hi all
> > >
> > > I have recently installed addaware and the jaws scrips on to my new
> > > computer. I am having trouble selecting all the objects that need to
be
> > > removed. i have tried going to the start of the list of critical
> objects,
> > > hitting the right mouse button and selecting all but it doesn't seem
to
> > > work. can anyone help?
> > >
> > > karen
> > >
> > >
> > > ** To leave the list, click on the immediately-following link:-
> > > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > > ** If this link doesn't work then send a message to:
> > > ** access-uk-request@xxxxxxxxxxxxx
> > > ** and in the Subject line type
> > > ** unsubscribe
> > > ** For other list commands such as vacation mode, click on the
> > > ** immediately-following link:-
> > > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> > > ** or send a message, to
> > > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> > >
> > >
> > >
> > > --
> > > No virus found in this incoming message.
> > > Checked by AVG Anti-Virus.
> > > Version: 7.0.308 / Virus Database: 266.11.11 - Release Date: 16/05/05
> > >
> > >
> >
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** access-uk-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> >
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.322 / Virus Database: 266.11.12 - Release Date: 17/05/05
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
