Thank you very much, Paul, you’ve been most helpful. Now I need to test
those commands in a real post and see how I get on.
Kind regards,
Amro
On 04/12/2020 03:58 pm, Life in Six Dots wrote:
Hi Amro,** To leave the list, click on the immediately-following link:-
Those are correct.
As for the title, no it won't work. If you need the title to be aligned right
then you're going to have to change the default.
You can do this by adding some custom CSS at Appearance > Customise >
Additional CSS or choose a theme or plugin that will do it for you. The first option
would be best in my opinion.
All the best, Paul
-----Original Message-----
From: access-uk-bounce@xxxxxxxxxxxxx <access-uk-bounce@xxxxxxxxxxxxx> On Behalf
Of Amro Bilal
Sent: 04 December 2020 15:16
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: WordPress accessibility
Hi Paul,
That’s excellent. thanks a lot for this.
Just to make sure I got it right, would you be so kind to check the below two
examples?
1. The text of the paragraph is: Paragraph one
<p styles="text-align: right;">Paragraph one</p>
2. The text of the hyperlink is: Click here for Google
<a herf="www.google.com">Click here for Google</a>
And one more question please, do you know if the text alignment code can be
used in the email’s subject field for the title?
Kind regards,
Amro
On 04/12/2020 10:52 am, hello@xxxxxxxxxxxxxxxxx wrote:
Hi Amro,** To leave the list, click on the immediately-following link:-
If you are going to be posting by email, then you'll have to manual format the
text before emailing. To align the text to the right you'll need to add the
following code per paragraph:
<p styles="text-align: right;">Your paragraph</p>
The same for making an active hyperlink. The code for adding a hyperlink is:
<a herf="place full link here">Your text here</a>
I hope that helps.
All the best, Paul
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx <access-uk@xxxxxxxxxxxxx> On Behalf Of
Amro Bilal
Sent: 03 December 2020 18:47
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: WordPress accessibility
Thanks a lot both for your replies. Let me explain a little more. But first,
let me say I’ve read a little and had a poke around, and I think I’m making
some progress with WordPress. Now, I will be using WordPress.com and not the
programme. I found a very neat feature on WordPress.com called Post by Email,
where you send an email and WordPress convert it into a post and upload it
automatically. This method is sufficient, as I won’t be creating, nor
maintaining a website at this stage. I was invited to be an editor to an
already existing blog/website to publish my articles. Now I have only two
queries on the Post by Email method, and if someone can help me with them, I
think I’d be good to go.
When I sent an email to try Post by Email, the text of the article was aligned
to the right, but WordPress didn’t preserve this alignment, and aligned the
text to the left. The article was in Arabic, so the entire text was aligned to
the right. This is the more pressing issue of the two I have.
The other issue I faced was that the article had a hyperlink, but this
hyperlink appeared as normal text in the post rather than a hyperlink. I think
I will be able to figure out this issue, but it looks that the text alignment
problem is the one that needs some advanced knowledge.
Again, any advice is gratefully received.
Amro
On 03/12/2020 12:52 pm, hello@xxxxxxxxxxxxxxxxx wrote:
Hi Amro,** To leave the list, click on the immediately-following link:-
WordPress is accessible, although I have found disabling Gutenberg and using
the Classic Editor is makes it easier to use with a screen reader.
All the best, Paul
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx <access-uk@xxxxxxxxxxxxx> On Behalf Of
Amro Bilal
Sent: 02 December 2020 13:54
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] WordPress accessibility
Hi all,
I was invited to contribute to a blog on WordPress. I’ve never used WordPress
before and know very little about it. Is it accessible and easy to use with
Jaws? Or shall I not waste my time?
All I need to do at this stage is to create new posts and post them on this
blog. I searched Google for tutorials about using WordPress with JAWS and few
results came back, but maybe someone could suggest a good tutorial for a
WordPress novice? Also, I checked the JAWS help files for any specific
WordPress instructions but unless I missed it there was none.
Any advice is most welcome.
Amro
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
