[access-uk] Re: TVOnics New Firmware with TTS Support Released!
- From: "martin wilsher" <martinwilsher@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Fri, 20 Sep 2013 17:01:42 +0100
I don't know about the problems with the firmware, but finding that other
USB was a good thing. yes it's a pain the tts doesn't come up talking after
the upgrade, wish it would, but it's not a big deal if you can operate the
menus to get it going again. though a button to enable tts or disable it
like for the AD would be a good thing.
_____
From: access-uk-bounce@xxxxxxxxxxxxx [mailto:access-uk-bounce@xxxxxxxxxxxxx]
On Behalf Of Mobeen Iqbal
Sent: 20 September 2013 16:51
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: TVOnics New Firmware with TTS Support Released!
hi martin.
yep, the design of that box could've been improved *chuckles*. So does that
mean that the firmware bugs have been rectified? if so then the RNIB don't
need to worry, they're probably worried about warranty claims. as i said its
not necessary for customers to upgrade unless you want the extra
functionality. I'm very glad your box hasn't gone bang.
cheers,
Mo.
On 20/09/2013 16:42, martin wilsher wrote:
HI Mo:
yes I found it, thanks. that under the wing one is a complete pest to get
to. probably why they provide two, in case u bust one *grin* yes upgrade
went well, though thanks to u I had the means to get my tts working again.
the memory note, menu, one, ok,2 ok, three right arrow would work for
getting tts up and running I think.
_____
From: access-uk-bounce@xxxxxxxxxxxxx [mailto:access-uk-bounce@xxxxxxxxxxxxx]
On Behalf Of Mobeen Iqbal
Sent: 20 September 2013 16:36
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: TVOnics New Firmware with TTS Support Released!
Hi martin.
I am glad it worked for you! Yes, there is a USB port on the back as far as
I can remember its under the scartt socket. I hope your box is ok? RNIB seem
to think the firmware could be unstable though I think that was the previous
version that did not include tts support. My box has been fine for over a
week.
Cheers,
Mo.
martin wilsher <mailto:martinwilsher@xxxxxxxxxxxxxx>
<martinwilsher@xxxxxxxxxxxxxx> wrote:
HI Mo:
Thanks for this. Btw, can u tell me on the dtr hd box, is there another USB
port in a better place than the one on the bottom right under the wing? It
was a thorough pest trying to get the usb stick in there. Btw, now I note
the box makes a funny tune when going into standby. Thanks.
-----Original Message-----
From: access-uk-bounce@xxxxxxxxxxxxx [mailto:access-uk-bounce@xxxxxxxxxxxxx]
On Behalf Of Mobeen Iqbal
Sent: 20 September 2013 14:12
To: undisclosed-recipients:
Subject: [access-uk] TVOnics New Firmware with TTS Support Released!
Hello Everyone.
I'm surprised noone's mentioned this officially yet. Many of us have TVOnics
set top boxes. As some of you may know, a company called Pulse Eight aquired
the TVOnics boxes and agreed to keep on developing them.
Last week,
i
noticed that a new firmware file was listed on the pulse eight
website. It would appear that this firmware rebrands the box as a pulse
eight box, and also allows you access to the channels recently added to
freeview that require the internet. new channels are being added all the
time, and if you connect your box to a broadband router, then you can access
the new channels that are broadcasting over the internet as well as your
standard channels. Also, i'm guessing they've changed the check for update
feature so the box now contacts pulse eight for updates, only a guess though
as there doesn't appear to be a change log anywhere. The upgrade process is
fully accessible, though i did manually have to reenable speech afterwards.
Instructions are below, though i've only tested these once having only my
box to test them on.
as always, carry out these instructions at your own risk!
First, download and save the
appropriate firmware file for your box.
HD500: the one supplied by the RNIB, the plastic box with wings.
http://www.pulse-eight.com/store/download/get/20
Z500HD: the metal shoobox stile box.
http://www.pulse-eight.com/store/download/get/19
Copy the upgrade file to a pen drive.
Plug the pen drive in to your boxes USB port.
Press menu and go down to service.
go down to USB software upgrade. when you press select, the box should ask
you if you want to update to the new software version 3 from your current
version.
right arrow to yes and press select.
the update will begin, and after about 4 minutes your box will restart.
NOTE: you could lose speech at this point when the box turns back on. if
pressing the blue button, that's bottom right doesn't work, here
are
some
instructions to reenable accessibility. If you can hear the TV channel you
had the box on when you upgraded, that means that probably nothing's gone
wrong. here's what i did.
First, to make sure there are no prompts on the screen, power down your box
either via the power button or by unplugging it if the power button doesn't
power it down.
power the box back on, and your TV channel should come back on.
press the menu button.
go down once to settings and press select.
go down twice to accessibility settings and press select.
go down 3 times to text to speech, then press your right arrow. this should
turn on text to speech.
you shouldn't need to retune the box. as always, if anyone would like a
hand please contact me on or off list.
I hope i get credited for these instructions if the RNIB use them, as they
haven't published any of their own yet. fat chance.
Enjoy!<
br
/>
Mo.
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
