[access-uk] Re: SD Card Error
- From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sun, 30 Nov 2014 18:13:58 -0000
Hi,
Actually you can format the card, even if the PC doesn't recognise it, if
you go to http://www.sdcard.org and get the formatter utility, which formats
better than Windows anyway.
All the best
Steve
--
Computer Room Services
77 Exeter Close
Stevenage
Hertfordshire
SG1 4PW
Tel: +44(0)1438-742286
Mob: +44(0)7956-334938
Fax: +44(0)1438-759589
Email: steve@xxxxxxxxxxxxxx
Web: http://www.comproom.co.uk
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Whizza
Sent: 30 November 2014 16:00
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: SD Card Error
Hi Sharon,
I was going to suggest you formatted the card but if your computer doesn't
recognise it, you can't do that either. Can you still get into the menus on
the stream even with the media error three? If you can, you could then
format the card on the stream itself. You'd lose all your stuff, of course,
but at least it would save the card.
Cheers and good luck,
Sandra.
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
