[access-uk] Re: FineReader again
- From: "Marie BAISEZ" <marie.baisez@xxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Wed, 21 Feb 2007 08:45:01 +0100
That's ok, the important thing is not to connect the scanner to the pc
before its software is installed.
Marie
----- Original Message -----
From: "Andy Collins" <andy@xxxxxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Tuesday, February 20, 2007 10:15 PM
Subject: [access-uk] Re: FineReader again
> Marie - I don't seem to get prompted to connect the scanner, when
> installing
> it's software; the software for the Epsom 3170 installs without the
> scanner
> being connected, then when I connect it, the 'found new hardware' wizard
> pops up. - Andy
> ----- Original Message -----
> From: "Marie BAISEZ" <marie.baisez@xxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Tuesday, February 20, 2007 8:52 PM
> Subject: [access-uk] Re: FineReader again
>
>
> when you do, remember to only plug in the scanner and connect it to the pc
> when prompted, not before, you probably know this, but I've been caught by
> this quirk more than once.
> Hope this helps a little.
> Marie
> ----- Original Message -----
> From: "Andy Collins" <andy@xxxxxxxxxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Tuesday, February 20, 2007 7:12 PM
> Subject: [access-uk] Re: FineReader again
>
>
>> Thanks anyway, Amro - think I'll try reinstalling the scanner and see if
>> that makes any difference. - Andy
>> ----- Original Message -----
>> From: "Amro Bilal" <amro_bilal@xxxxxxx>
>> To: <access-uk@xxxxxxxxxxxxx>
>> Sent: Monday, February 19, 2007 9:56 PM
>> Subject: [access-uk] Re: FineReader again
>>
>>
>> I'm not sure I'm afraid, Andy. I use the try and buy FR 8.0 professional
>> edition and haven't encounter any similar problems. Maybe you could try
>> and
>> run version 8 and see if things improve? Though it would be unfair on you
>> to
>> have to pay for an upgrade to sort your problem, specially that FR v7 was
>> working ok on your system previously.
>>
>> Sorry I couldn't be much of a help.
>>
>> Amro
>> ----- Original Message -----
>> From: "Andy Collins" <andy@xxxxxxxxxxxxxxxxxxx>
>> To: <access-uk@xxxxxxxxxxxxx>
>> Sent: Sunday, February 18, 2007 9:30 PM
>> Subject: [access-uk] Re: FineReader again
>>
>>
>>> Hi Amro - There are 2 issues with this for me, the first is with
>>> Finereader
>>> 7, which when opened, causes JFW6.2 to unload, and/or my machine to
>>> freeze;
>>> I say and/or, as the problem is not consistent, sometimes after waiting
>>> for
>>> a minute or so, and using a hot key, I can get JFW back talking again,
>>> at
>>> other times, the PC freezes, and I have to re-boot.
>>>
>>> The second problem is that on those occasions when I can get JFW back
>>> talking again, and I have FR7 open, and try to do a scan, using the
>>> FineReader interface, I get a message saying that Epsom 3170 scan
>>> couldn't
>>> be started, going on to ask if I want to open the trouble shooter; the
>>> trouble shooter doesn't seem to have a topic that answers this problem,
>>> so
>>> it looks as if there's a setting I need to change under the scanning tab
>>> for
>>> my Epsom 3170 to work with FR.
>>>
>>> Hope this makes some kind of sense? Can you shed any further light on
>>> what
>>> needs to be done?
>>>
>>> Thanks - Andy
>>> ----- Original Message -----
>>> From: "Amro Bilal" <amro_bilal@xxxxxxx>
>>> To: <access-uk@xxxxxxxxxxxxx>
>>> Sent: Sunday, February 18, 2007 7:54 PM
>>> Subject: [access-uk] Re: FineReader again
>>>
>>>
>>> Hi Andy,
>>>
>>> I didn't need to change anything with Fine Reader to use it with Jaws.
>>> What
>>> is it that you're not happy with?
>>>
>>> Cheers,
>>> Amro
>>> ----- Original Message -----
>>> From: "Andy Collins" <andy@xxxxxxxxxxxxxxxxxxx>
>>> To: <access-uk@xxxxxxxxxxxxx>
>>> Sent: Saturday, February 17, 2007 2:40 PM
>>> Subject: [access-uk] FineReader again
>>>
>>>
>>>> Hi all - thought I'd ask again as nobody has come back on this one. I
>>>> need
>>>> to know how to set up Finereader to work best with JFW 6.2; can't seem
>>>> to
>>>> figure it out!
>>>>
>>>> Thanks - Andy
>>>>
>>>> ** To leave the list, click on the immediately-following link:-
>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>> ** If this link doesn't work then send a message to:
>>>> ** access-uk-request@xxxxxxxxxxxxx
>>>> ** and in the Subject line type
>>>> ** unsubscribe
>>>> ** For other list commands such as vacation mode, click on the
>>>> ** immediately-following link:-
>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>>> ** or send a message, to
>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>
>>>>
>>>
>>> ** To leave the list, click on the immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** access-uk-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on the
>>> ** immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>
>>>
>>> --
>>> This email has been verified as Virus free
>>> Virus Protection and more available at http://www.plus.net
>>>
>>> ** To leave the list, click on the immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** access-uk-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on the
>>> ** immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>
>>>
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>> --
>> This email has been verified as Virus free
>> Virus Protection and more available at http://www.plus.net
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>>
>> __________ NOD32 2072 (20070220) Information __________
>>
>> This message was checked by NOD32 antivirus system.
>> http://www.eset.com
>>
>>
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
> --
> This email has been verified as Virus free
> Virus Protection and more available at http://www.plus.net
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
> __________ NOD32 2072 (20070220) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.eset.com
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
