[24hoursupport] Re: RAM Upgrade
- From: "Spider" <spider1@xxxxxxxxxxxxxxx>
- To: <24hoursupport@xxxxxxxxxxxxx>
- Date: Sat, 21 Dec 2002 23:29:01 -0500
Someone may have a more detailed answer then I can give you, but bottom
line is that it sounds as though you have mis-matched RAM. One is a
different type then the other but both are compatible with your system
they just are not compatible together.
Spider
-----Original Message-----
From: 24hoursupport-bounce@xxxxxxxxxxxxx
[mailto:24hoursupport-bounce@xxxxxxxxxxxxx] On Behalf Of Lethier
Sent: Saturday, December 21, 2002 10:58 PM
To: 24hoursupport@xxxxxxxxxxxxx
Subject: [24hoursupport] RAM Upgrade
I am trying to upgrade RAM on a Toshiba Satellite 1800 series notebook.
The RAM that the salesmen sold me was Azenram 128mb 133hz. My notebook
has two slots and can be upgraded to 512mb. Currently, I have Samsung
128mb 100hz in slot 1. When I install the new RAM in slot 2 and keep the
old RAM in slot 1, my notebook starts, the hard drive inidicator
momentarily lights up, and then I get nothing (a dark screen). When I
reverse the two RAM chips the same thing happens. However, when I use
the new RAM chip alone in either slot, I experience no difficulties. I
have updated my BIOS. What could be causing this problem?
Thanks
lethier
- Users can unsubscribe from this list by sending email to
24hoursupport-request@xxxxxxxxxxxxx with 'unsubscribe' in the
Subject field OR by logging into the Web interface at
http://webpages.charter.net/chizotz/
- Users can unsubscribe from this list by sending email to
24hoursupport-request@xxxxxxxxxxxxx with 'unsubscribe' in the
Subject field OR by logging into the Web interface at
http://webpages.charter.net/chizotz/
Other related posts:
