[24hoursupport] Re: RAM Upgrade

  • From: "M.Thakur" <dnb_mthakur@xxxxxxxxxxxxx>
  • To: 24hoursupport@xxxxxxxxxxxxx
  • Date: Sun, 22 Dec 2002 11:54:02 +0530

 

Two possible error
1. Parity errors off the chips
2. Second bank is faulty due to collection of the dust(try blowing
compressed air into the second bank)
HTH
M. Thakur,

----- Original Message -----
From: "Lethier" <ljethier@xxxxxxx>
To: <24hoursupport@xxxxxxxxxxxxx>
Sent: Sunday, December 22, 2002 9:28 AM
Subject: [24hoursupport] RAM Upgrade


>
>
> I am trying to upgrade RAM on a Toshiba Satellite 1800 series notebook.
The
> RAM that the salesmen sold me was Azenram 128mb 133hz. My notebook has two
> slots and can be upgraded to 512mb. Currently, I have Samsung 128mb 100hz
in
> slot 1. When I install the new RAM in slot 2 and keep the old RAM in slot
1,
> my notebook starts, the hard drive inidicator momentarily lights up, and
> then I get nothing (a dark screen). When I reverse the two RAM chips the
> same thing happens. However, when I use the new RAM chip alone in either
> slot, I experience no difficulties. I have updated my BIOS. What could be
> causing this problem?
>
> Thanks
> lethier
>
>
> - Users can unsubscribe from this list by sending email to
> 24hoursupport-request@xxxxxxxxxxxxx with 'unsubscribe' in the
> Subject field OR by logging into the Web interface at
> http://webpages.charter.net/chizotz/


- Users can unsubscribe from this list by sending email to 
24hoursupport-request@xxxxxxxxxxxxx with 'unsubscribe' in the 
Subject field OR by logging into the Web interface at
http://webpages.charter.net/chizotz/ 

Other related posts: