[vicsireland] Re: Kurzweil 1000 v9 Issue
- From: "Flor Lynch" <florlync@xxxxxx>
- To: <vicsireland@xxxxxxxxxxxxx>
- Date: Thu, 5 Nov 2009 12:00:40 -0000
Hi Michael,
When in K1000 go to Tools alt+t, then down-arrow to Scanning... and
press enter; and then tab through the dialogue. You will come to
"selected scanner source". (Has that been changed since your scanner
was working properly with Kurzweil?) you can select the appropriate
source from the group of radiobuttons, and then ok your choice; and then
alt-t, v, and save the setting to your default settings file. Further
scanning problems like this would also be fixable with that scanning
dialogue.
----- Original Message -----
From: "Michael Lavin" <michael.lavin@xxxxxxxxxxxxxxx>
To: <vicsireland@xxxxxxxxxxxxx>
Sent: Thursday, November 05, 2009 10:30 AM
Subject: [vicsireland] Kurtzweil 1000 v9 Issue
Hello List Members
I am using K1000 v9 on a Windows XP Professional system with a HP
Scanjet 5400C scanner and just recently I started experiencing problems
with scanning a document. The scanner starts up with the message
Starting Scanning and then just hangs.
I successfully scanned a document from the Control Panel under Scanners
& Cameras so it seems that the hardware scanner is functioning OK.
I re-installed the K1000 software but to no avail.
One question bugs me I cannot find out anywhere in the K1000
application where the system is pointing to the HP Scanjet 5400C when I
issue the scan command
Anyone have any ideas?
Regards,
Michael
===========================================================
The vicsireland mailing list
To unsubscribe at any time send a mail to:
vicsireland-request@xxxxxxxxxxxxx
with the word "unsubscribe", without the quotes in the subject of the
message.
To contact the moderator send mail to:
tim.j.culhane@xxxxxxxxx
For mor information on the Visually Impaired Computer Society visit:
http://www.vicsireland.org
===========================================================
The vicsireland mailing list
To unsubscribe at any time send a mail to:
vicsireland-request@xxxxxxxxxxxxx
with the word "unsubscribe", without the quotes in the subject of the message.
To contact the moderator send mail to:
tim.j.culhane@xxxxxxxxx
For mor information on the Visually Impaired Computer Society visit:
http://www.vicsireland.org
Other related posts:
