[triadtechtalk] Re: Backup for New HD

  • From: "Sandy O'Neill" <muruagogo@xxxxxxxxxxxxxx>
  • To: <triadtechtalk@xxxxxxxxxxxxx>
  • Date: Sun, 19 Oct 2003 11:39:13 +1000

I'm no expert by any means but I'm not sure that's correct....... I'm pretty 
sure I used Drive Image when I installed a new hard drive and below is a 
excerpt of the blurb from Powerquest.  I think Norton Ghost would do the same 
thing and many others most probably.

Sandy :)

Upgrading Your Hard Drive?
Ready to buy a larger hard drive or upgrade to a new computer? Drive Image 7 
makes it easy to transfer everything on your old drive to your new drive. You 
gain the benefits of a better system, without the hassle of reinstalling 
everything. And, with Drive Image's easy-to-use wizard interface, you can 
perform the entire process in a matter of minutes.



  ----- Original Message ----- 

  From: ChasM49@xxxxxxx 
  To: triadtechtalk@xxxxxxxxxxxxx 
  Sent: Sunday, October 19, 2003 11:05 AM
  Subject: [triadtechtalk] Re: Backup for New HD


  In a message dated 10/18/2003 7:16:39 PM Central Standard Time, 
muruagogo@xxxxxxxxxxxxxx writes:


    backup program to transfer window XP and all programs and files to a new HD 
(including a boot disk).


  there is no program that will make a backup for your whole drive... a backup 
will most cases back up the system files...and then you need the program on the 
new drive to tranlate it to the new drive and if new drive is blank.... well... 
now what?..... best luck I have had has been to get the system to working as 
best you can.. then install new drive as a slave.. fdisk and format etc... and 
then copy the c drive to the new drive and after copying check to insure was 
copied all ok.. or hope it was.... then redo jumpers as to what one is slave 
and master making the new one the master and hopoe it will boot all ok... then 
check out all data has been transfered all ok.to make a complete copy of your 
drive you need a drive image...... and when going to a new hard drive then 
makes a difference again.... even making a copy all the way usually will be 
problems due to new boot sector and if bigger drive then new paramaters of the 
new drive compared to old drive.... to simply swithc out a drive to "repair" a 
system that is giving you headaches by installing a new drive and copying it 
all over will not correct your origianl problem.... still going to be there on 
the new drive,just transfered is all... especially if not a bad drive....
          using the drive maufactuers programs for drive testing they will tell 
you for an accurate and percise check of its condition it will require 
destruction of the data conatined.. do you want to continue with test... and in 
doing so it then will identy sectora that are badand so note them taking them 
out of play.... to see this in action.. go out and buy any drive you wish brand 
spanking new and place it in your pc and do the manufacturers testing.. you 
will be suprosed at the numebr of BAD sectors it picks up but they are already 
idnetified as being bad and not accesseible by any programing.....
         best program I have found to check and work in drives is spinrite5  
form gibson research... but..... it requires you to be using DOS only to use 
it.... and can be very tricky in doing so and attemtping to recover any data 
contained on the drive.....and. if is NTSF.. its a whole new ball game then and 
aint even going to touch it as am still trying? to muddle thru what the heck 
that file system does and how it works,even tho using it on one xp pro box and 
have to since is one machine with a dvd burner.... so I would absolutely make 
sure my system works first... as near perfect as can be.... then.... use a cd 
burenr and imaging software to make the copy and having it bootable..... in 
that way should be able to just about make a good working system with a new and 
bigger drive... but again... is it really a bad drive and not sme other jumbled 
program or settings?........ been thru it.. spent the money.... and now have me 
a few drives laying around on hand have found to be in perfect opreating 
condition....now if only couple mother boards and cases... have me a few back 
up boxes to play with..... lol.........chuck...in Ok 

Other related posts: