Warp mode....you know what that does right? Runs the emulation as though the processor is running much faster clock cycles....right? On Thu, May 21, 2009 at 5:53 PM, Ian Colquhoun <icolquhoun@xxxxxxxxx> wrote: > On Thu, May 21, 2009 at 5:37 PM, Gil Winkler <kimmyland@xxxxxxxxx> wrote: > > No, actually I am talking about running it at 250fps, which is done > through > > the multiplication factor > > option (200%, 100%, 50%, 20%, 10%, No limit, Custom) and also known as > 'warp > > mode'....which > > brings it up to about 26MHz and almost to 55 when I deselect various > > options. > > > > Right....that is what I was talking about :) I am using the PET 4032 > > emulator and TRYING to run it faster than > > 5500% (Considering that I have 4.2Ghz at my disposal, this would mean, > after > > accounting for the loss of speed > > through compilation and emulation that there should be somewhere about a > > 100x-fold loss of speed.) I am wondering > > if the software deliberately throttles VICE to top-out at somewhere > around > > 60MHz or is the emulator so badly written that > > 4,200Mhz will only translate to 30MHz on VICE? > > I fail to understand your relation of VICE fps and Mhz of anything. I > have a feeling you don't entirely understand what you're asking and > neither do I. > > -- > Ian Colquhoun <icolquhoun@xxxxxxxxx> > >