Mike, Be safe & change C3407 100uf/50v Between Heatsink & Main Filter ...even if it checks good & even though you have B+ on the HOT Also check : Rx3242 in flyback circuit & Cr3411 18v To220 Rectifier On Smps Heat Sink Jeff Stielau Shoreline Electronics Repair 125 Beechtree Lane Westbrook,CT 06498 860-399-1861 Voice 860-664-3535 Fax jstielau@xxxxxxxx ----- Original Message ----- From: "Mike Barnett" <passthecash@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, October 08, 2001 9:18 AM Subject: [TechAssist] Zenith SG2589W No power up > > Zenith Model SG2589W Module# 9-958 > This unit wont power up, standby 5v is present and have 136 at collector of > HOT, vcc at vertical is ok. Checked all caps in power primary and high > voltage curcuit all are ok. checked resistors near and around fly. > Any idea's? > Thanks > > > > Get It Fixed At > Rochester Electronics > 630 West Ridge Rd. > Rochester, NY 14615 > 716.663.6870 > www.RochesterElectronicsRepair.com > > > > > > _______________________________________________________ > Send a cool gift with your E-Card > http://www.bluemountain.com/giftcenter/ > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.