Common issue. On the 9-1674 in the middle there is an upright daughter board with a connector at the top edge. Resolder it. Phil Bader Shaun wrote: >This set came in dead I replaced the Flyback, horz output and CR3412 all >were shorted. The set fires up now and has high voltage and sound, but no >raster. The filaments are not lighting up, I checked the high voltage block >and it measures 47k. I checked the board for cold solder, loose connections >and burned resistors everything looks and measures good. Does anyone have >any idea what I am missing on this one? > >Shaun > >Advanced Electronics >224 West Riverview Ave. >Fort Morgan, CO 80701 > > >----------------------------------------------------------------------------- >Lost Password: >http://www.tech-assist.org and select "Login Problems?". >Email Archives: >//www.freelists.org/archives/techassist/ > > > -- Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: tjanphyl@xxxxxxxxxxxxxxx ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/