Guess that explains it then thanks very much weird thing though, the 95-4134-27 I removed from a rebuilt 9-1674-03 number from the box and the Mexico rebuilt sticker says 009-01674-03R. The TV's original board is a 9-1674-3 wonder what the difference is? I do see that the original board has IC3201, CR3217 and R3266 and the rebuilt is missing these parts it only has a 5.6 ohm 5 watt resistor going from flyback side of R3266 to where the out would be on IC3201 also looks like C3244 was removed. Wonder what would happen if I did the same with this flyback in the original module. Shaun Advanced Electronics 224 West Riverview Ave. Fort Morgan, CO 80701 ----- Original Message ----- From: "Ron Miller d.b.a. Country TV" <rlmbkm@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, November 01, 2004 6:02 PM Subject: [TechAssist] Re: Zenith PVY5264DT (9-1674-3) SMPS No filaments lighting > -15 and -31 are the same ,you have the wrong Fly. > Country TV > Ron Miller > Inez, TX. 77968 > > ----- Original Message ----- > From: "Shaun" <satguy@xxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Monday, November 01, 2004 6:53 PM > Subject: [TechAssist] Re: Zenith PVY5264DT (9-1674-3) SMPS No filaments > lighting > > > > I thought that to the original was a part number 95-4134-31 and the > > replacement was 95-4134-27 maybe they won't interchange. Anyone know? > > > > Shaun > > > > Advanced Electronics > > 224 West Riverview Ave. > > Fort Morgan, CO 80701 > > ----- Original Message ----- > > From: "Ron Miller d.b.a. Country TV" <rlmbkm@xxxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Monday, November 01, 2004 5:40 PM > > Subject: [TechAssist] Re: Zenith PVY5264DT (9-1674-3) SMPS No filaments > > lighting > > > > > > > Possible wrong flyback? 95-4134-? > > > Country TV > > > Ron Miller > > > Inez, TX. 77968 > > > > > > ----- Original Message ----- > > > From: "Shaun" <satguy@xxxxxxxxxxxxx> > > > To: "tech" <techassist@xxxxxxxxxxxxx> > > > Sent: Monday, November 01, 2004 6:33 PM > > > Subject: [TechAssist] Zenith PVY5264DT (9-1674-3) SMPS No filaments > > lighting > > > > > > > > > > This set came in dead I replaced the Flyback, horz output and CR3412 > all > > > > were shorted. The set fires up now and has high voltage and sound, but > > no > > > > raster. The filaments are not lighting up, I checked the high voltage > > > block > > > > and it measures 47k. I checked the board for cold solder, loose > > > connections > > > > and burned resistors everything looks and measures good. Does anyone > > have > > > > any idea what I am missing on this one? > > > > > > > > Shaun > > > > > > > > Advanced Electronics > > > > 224 West Riverview Ave. > > > > Fort Morgan, CO 80701 > > > > > > > > > > > > > > > -------------------------------------------------------------------------- > > > --- > > > > Lost Password: > > > > http://www.tech-assist.org and select "Login Problems?". > > > > Email Archives: > > > > //www.freelists.org/archives/techassist/ > > > > > > > > > > > > > > -------------------------------------------------------------------------- > > --- > > > Lost Password: > > > http://www.tech-assist.org and select "Login Problems?". > > > Email Archives: > > > //www.freelists.org/archives/techassist/ > > > > > > -------------------------------------------------------------------------- > --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/