[TechAssist] Re: Zenith PVY5264DT (9-1674-3) SMPS No filaments lighting
- From: "Ron Miller d.b.a. Country TV" <rlmbkm@xxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Mon, 1 Nov 2004 18:40:33 -0600
Possible wrong flyback? 95-4134-?
Country TV
Ron Miller
Inez, TX. 77968
----- Original Message -----
From: "Shaun" <satguy@xxxxxxxxxxxxx>
To: "tech" <techassist@xxxxxxxxxxxxx>
Sent: Monday, November 01, 2004 6:33 PM
Subject: [TechAssist] Zenith PVY5264DT (9-1674-3) SMPS No filaments lighting
> This set came in dead I replaced the Flyback, horz output and CR3412 all
> were shorted. The set fires up now and has high voltage and sound, but no
> raster. The filaments are not lighting up, I checked the high voltage
block
> and it measures 47k. I checked the board for cold solder, loose
connections
> and burned resistors everything looks and measures good. Does anyone have
> any idea what I am missing on this one?
>
> Shaun
>
> Advanced Electronics
> 224 West Riverview Ave.
> Fort Morgan, CO 80701
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
