Replaced the STK's on the convergence panel 9-1690 (see below), the 1 ohm resistors R1460,1463 and two more beside them. All else seemed OK. Installed board powered up, customer convergence was way out.Did the cust. convergence and fell right in. No other converg needed. test running now.Thought I saw a slight variation in brightness intermittently.May be poor connections on CRT socket or cables on boards from being moved to shop.Will flex boards and see. Still would like to locate the two resistors on 9-1674: R3243,R3244. (82K and 110K) Phil Bader Phil Bader wrote: > > This 46" Zenith PTV unit has a 9-1674 main, but has a bad converg. > module 9-1690. The house power went on and off several times rapidly and > this is the result.On this converg panel( 9-1690)two resistors are > toasted feeding the two STK0392-110 chips (IC4008,4009) > The resistors are R1460 and R1463. I think they are 1 ohm, need to > verify. > I will also change the STK's. > Phil Bader > -- > Philip Bader > Jan Phyl TV Inc. (estab. 1976) > 3420 Recker Hwy. Winter Haven, Fl. 33880 > Fax (863) 299-8821 > email: philbad@xxxxxxxxxx > > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html -- Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: philbad@xxxxxxxxxx ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html