So Far none of the Normal smaller Components seem to help repair this set. The Relay does Click, and all the Large Ceramic Resistors Check ok. I notice this Uses the TFB4099AD Type Flyback Xfmr. & that FBT does have a History of Failure. Would it cause just the Click Click relay movement if indeed its bad? Regards, Steve Hearns Technotronic Dimensions, NY [USA] WWW.TECHNOTRONIC-DIMENSIONS.COM 1-877-817-9885 (Voice / Fax Toll Free - US Only) ----- Original Message ----- From: "Technotronic Dimensions" <steve@xxxxxxxxxxxxxxxxxxxxxxxxxxx> To: "Tech_Assist.ORG" <techassist@xxxxxxxxxxxxx> Sent: Monday, August 09, 2004 2:24 PM Subject: [TechAssist] Toshiba CF3062A TAC9150 Trying to help another Shop with a Dead Set. They replaced : Q801 = STRS5241 C863 = 4.7@50V C866 = 22@25V C884 = 330@160V C840 = 1000@25V And Q840 , the 5v Regulator IC Is putting out a good 5V.....so it was not replaced. Is there anything else besides Bad solder to check for ? Also, not 100 Percent Sure those Caps are correct location numbers and Values. The PS Board is a PB1018, and if anyone has a Scan or a PDF of that board they could sent, it may help. Thanks. Steve Hearns Technotronic Dimensions, NY [USA] WWW.TECHNOTRONIC-DIMENSIONS.COM 1-877-817-9885 (Voice / Fax Toll Free - US Only) ---------------------------------------------------------------------------- - Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/