do you have 20 volts onc880 115 volts onc887 I have paper schematic if you need it I will send it by mail Andrew Rose Action TV. Holbrook ny. ----- Original Message ----- From: "Technotronic Dimensions" <steve@xxxxxxxxxxxxxxxxxxxxxxxxxxx> To: "Tech_Assist.ORG" <techassist@xxxxxxxxxxxxx> Sent: Monday, August 09, 2004 2:24 PM Subject: [TechAssist] Toshiba CF3062A TAC9150 > Trying to help another Shop with a Dead Set. They replaced : > > Q801 = STRS5241 > C863 = 4.7@50V > C866 = 22@25V > C884 = 330@160V > C840 = 1000@25V > > And Q840 , the 5v Regulator IC Is putting out a good 5V.....so it was not > replaced. Is there anything else besides Bad solder to check for ? Also, not > 100 Percent Sure those Caps are correct location numbers and Values. The PS > Board is a PB1018, and if anyone has a Scan or a PDF of that board they > could sent, it may help. Thanks. > > > Steve Hearns > Technotronic Dimensions, NY [USA] > WWW.TECHNOTRONIC-DIMENSIONS.COM > 1-877-817-9885 (Voice / Fax Toll Free - US Only) > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/