Trying to help another Shop with a Dead Set. They replaced : Q801 = STRS5241 C863 = 4.7@50V C866 = 22@25V C884 = 330@160V C840 = 1000@25V And Q840 , the 5v Regulator IC Is putting out a good 5V.....so it was not replaced. Is there anything else besides Bad solder to check for ? Also, not 100 Percent Sure those Caps are correct location numbers and Values. The PS Board is a PB1018, and if anyone has a Scan or a PDF of that board they could sent, it may help. Thanks. Steve Hearns Technotronic Dimensions, NY [USA] WWW.TECHNOTRONIC-DIMENSIONS.COM 1-877-817-9885 (Voice / Fax Toll Free - US Only) ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/