[TechAssist] Re: Sony KP53S15

  • From: Bill Grabowski <bgrabowski@xxxxxxxxx>
  • To: techassist@xxxxxxxxxxxxx
  • Date: Wed, 03 Oct 2001 21:14:52 -0500

Thanks for your reply the fix was a cap and fusistor on the 200B+ to
screens....

Bill Grabowski
Triangle Appliance

Damon wrote:
> 
> Hi Bill,
> 
> I've seen a lot of these TVs and the fix is to replace the crt boards. I'm
> not sure, but there might also be an upgrade/bulletin regarding crt arcing
> that kills the outputs, you might want to try that if the crt boards are a
> little too pricey for your customer. Let me know if you need any info.
> ----- Original Message -----
> From: "Bill Grabowski" <bgrabowski@xxxxxxxxx>
> To: "Techassist" <techassist@xxxxxxxxxxxxx>
> Sent: Monday, October 01, 2001 8:05 PM
> Subject: [TechAssist] Sony KP53S15
> 
> >
> >
> >    I got this set from customer saying they heard a pop and the set
> > turned to
> > a bright pinkish picture and sound.  After I tried set I also get
> > pinkish picture
> > with retrace lines of three separate colors of red,green,and blue. If I
> > change
> > channels I lose picture and have only a bright pinkish screen with the
> > three
> > colored retrace lines and sound. I checked all pix tubes especially the
> > green and
> > found them okay. I checked all boards for blown parts or solder but all
> > seemed
> > fine.  Any help would be appreciated....  Thanks!!!!
> >
> > Bill Grabowski
> > Triangle Appliance
> > Help make your TechAssist online repair tips
> > database better!  Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with  unsubscribe  in the subject line.
> >
> 
> Help make your TechAssist online repair tips
> database better!  Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with  unsubscribe  in the subject line.
Help make your TechAssist online repair tips 
database better!  Submit your fixes here: 
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx 
with  unsubscribe  in the subject line.

Other related posts: