R104=270K, R153=47K, R154=5600, R156=3300, R562=1500, R568=10K, R591=390, R598=3900 ............PIN 10 of IC532 VOL out to r150= 2200 to r156=3300 to 157=1800 to 158=1k to pin 39 IC101, Check r153=47k and r154=5600(should have 9v on one side) Let me know if you need the print.........Charlie Charles Belich Slidewire Electronics MN Mailto:seashell@xxxxxxxxxx ----- Original Message ----- From: "Mike Barnett" <passthecash@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, November 10, 2001 7:57 AM Subject: [TechAssist] Sanyo model DS20030 need resistor values > > hi guys, > This sanyo model DS20030 Chassis 20030-03. Set came in with no > sound, had some water damage on the board right around the KS connector and > the CPU. I removed all the contamintion but some of the resistors were badly > damaged. Couldn'e get all the values of the bad ones but replaced them with > the closest i could figure. the set now has audio but i can't control the > volume at all. the sound is at max. When pushing the volume control OSD > reponds but with no decrease in volume. > I suspect that one or more of the resistors i replaced in the R1xx are > incorrect. > > Does anyone have a manual? I need resistor values for the following loc. > TIA > > R104, R153, R154, R156, R562, R568, R591 And R598 > > Thanks, > Mike > > > > > > Get It Fixed At > Rochester Electronics > 630 West Ridge Rd. > Rochester, NY 14615 > 716.663.6870 > www.RochesterElectronicsRepair.com > > > > > > _______________________________________________________ > Send a cool gift with your E-Card > http://www.bluemountain.com/giftcenter/ > > > ***************************************** > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > ***************************************** > To UNSUBSCRIBE write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > > ***************************************** Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips ***************************************** To UNSUBSCRIBE write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.