mike make sure your micro is changing the volume level just had a sharp chassis where the voltage wasn't changing al marquardt ampm@xxxxxxx ----- Original Message ----- From: Mike Barnett <passthecash@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, November 10, 2001 7:57 AM Subject: [TechAssist] Sanyo model DS20030 need resistor values > > hi guys, > This sanyo model DS20030 Chassis 20030-03. Set came in with no > sound, had some water damage on the board right around the KS connector and > the CPU. I removed all the contamintion but some of the resistors were badly > damaged. Couldn'e get all the values of the bad ones but replaced them with > the closest i could figure. the set now has audio but i can't control the > volume at all. the sound is at max. When pushing the volume control OSD > reponds but with no decrease in volume. > I suspect that one or more of the resistors i replaced in the R1xx are > incorrect. > > Does anyone have a manual? I need resistor values for the following loc. > TIA > > R104, R153, R154, R156, R562, R568, R591 And R598 > > Thanks, > Mike > > > > > > Get It Fixed At > Rochester Electronics > 630 West Ridge Rd. > Rochester, NY 14615 > 716.663.6870 > www.RochesterElectronicsRepair.com > > > > > > _______________________________________________________ > Send a cool gift with your E-Card > http://www.bluemountain.com/giftcenter/ > > > ***************************************** > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > ***************************************** > To UNSUBSCRIBE write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > ***************************************** Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips ***************************************** To UNSUBSCRIBE write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.