In that case, check for surface mounted capacitors in the lines that go from the FPA connector to the micro or gemstar module. Somethimes they will get leaky. Corey Brazell Audio Video Electronics 12169 SC Hwy 121 Newberry SC 29108 -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Gemini Computer & TV Sent: Thursday, August 19, 2004 9:00 AM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: RCA F32650(YX01), ATC113CA1 chassis, channels and menus scroll continously Thanks for that reminder as I forgot to include with my post the I did in fact undo the connector from the top panel controls and there are no switches on the chassis itself. Bob Waterman, CET® #RI-28 Master Technician License #9109 Service Manager / Parts Manager Gemini Computer, TV, & Security Alarms (508)695-7302 (508)695-7769 FAX geminitv@xxxxxxxxxxx geminitv@xxxxxxx www.geminicomputertvsecurityalarms.com ----- Original Message ----- From: "tvservice" <tvservice@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, August 19, 2004 9:54 AM Subject: [TechAssist] Re: RCA F32650(YX01), ATC113CA1 chassis, channels and menus scroll continously > front panel keyboard Bob! > Robert > tvservice@xxxxxxxxxxxxx > H & H Electronics Inc > > ----- Original Message ----- > From: "Gemini Computer & TV" <geminitv@xxxxxxxxxxx> > To: "Techassist" <techassist@xxxxxxxxxxxxx> > Sent: Thursday, August 19, 2004 8:31 AM > Subject: [TechAssist] RCA F32650(YX01), ATC113CA1 chassis, channels and > menus scroll continously > > > > I have a customer with an RCA F32650YX01 (ATC113CA1 chassis) that has no > or > > very intermittent response to front panel controls (on top of the set) and > > does accept commands from the remote. Sometimes the set works normally but > > most of the time the set will stay on channel 3 but the channel display > > keeps scrolling continously and cannot be stopped, except when entering > > another channel number (which is then only momentary before the scrolling > > continues). When this is happening and any menu is selected (TV menu, not > > Guide Plus), the sub menus beneath the selected menu will scroll > continously > > as well. If a video input is selected, it wil of course come right off and > > begin the channel scroll. I don't see any tips or bulletins for this > > condition but I highly suspect the Gemstar 4 module (part# 257871) as the > > culprit. This is an out of warranty customer and the set is currently at > > their home so I do not have it here in the shop. I did try clearing the > > Guide Plus setup but that did not help. Has anyone encountered this > symptom > > before? > > > > Bob Waterman, CET® #RI-28 > > Master Technician License #9109 > > Service Manager / Parts Manager > > Gemini Computer, TV, & Security Alarms > > (508)695-7302 > > (508)695-7769 FAX > > geminitv@xxxxxxxxxxx > > geminitv@xxxxxxx > > www.geminicomputertvsecurityalarms.com > > > > > > > > -------------------------------------------------------------------------- > --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ---------------------------------------------------------------------------- - Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/