[TechAssist] Re: RCA F32650(YX01), ATC113CA1 chassis, channels and menus scroll continously

  • From: "Gemini Computer & TV" <geminitv@xxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Fri, 20 Aug 2004 06:46:39 -0400

That seems to be the concensus as the following response indicates:

Try replacing the FPA. Had four of those go bad replacing # 5 tomorrow, part
# 249142.
Bob Waterman, CET® #RI-28
Master Technician License #9109
Service Manager / Parts Manager
Gemini Computer, TV, & Security Alarms
(508)695-7302
(508)695-7769 FAX
geminitv@xxxxxxxxxxx
geminitv@xxxxxxx
www.geminicomputertvsecurityalarms.com



----- Original Message ----- 
From: "tvservice" <tvservice@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, August 19, 2004 9:54 AM
Subject: [TechAssist] Re: RCA F32650(YX01), ATC113CA1 chassis, channels and
menus scroll continously


> front panel keyboard Bob!
> Robert
> tvservice@xxxxxxxxxxxxx
> H & H Electronics Inc
>
> ----- Original Message ----- 
> From: "Gemini Computer & TV" <geminitv@xxxxxxxxxxx>
> To: "Techassist" <techassist@xxxxxxxxxxxxx>
> Sent: Thursday, August 19, 2004 8:31 AM
> Subject: [TechAssist] RCA F32650(YX01), ATC113CA1 chassis, channels and
> menus scroll continously
>
>
> > I have a customer with an RCA F32650YX01 (ATC113CA1 chassis) that has no
> or
> > very intermittent response to front panel controls (on top of the set)
and
> > does accept commands from the remote. Sometimes the set works normally
but
> > most of the time the set will stay on channel 3 but the channel display
> > keeps scrolling continously and cannot be stopped, except when entering
> > another channel number (which is then only momentary before the
scrolling
> > continues). When this is happening and any menu is selected (TV menu,
not
> > Guide Plus), the sub menus beneath the selected menu will scroll
> continously
> > as well. If a video input is selected, it wil of course come right off
and
> > begin the channel scroll. I don't see any tips or bulletins for this
> > condition but I highly suspect the Gemstar 4 module (part# 257871) as
the
> > culprit. This is an out of warranty customer and the set is currently at
> > their home so I do not have it here in the shop. I did try clearing the
> > Guide Plus setup but that did not help. Has anyone encountered this
> symptom
> > before?
> >
> > Bob Waterman, CET® #RI-28
> > Master Technician License #9109
> > Service Manager / Parts Manager
> > Gemini Computer, TV, & Security Alarms
> > (508)695-7302
> > (508)695-7769 FAX
> > geminitv@xxxxxxxxxxx
> > geminitv@xxxxxxx
> > www.geminicomputertvsecurityalarms.com
> >
> >
> >
>
> --------------------------------------------------------------------------
> ---
> > Lost Password:
> > http://www.tech-assist.org  and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
>
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>



-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/

Other related posts:

  1. Home
  2. techassist
  3. Archive
  4. 08-2004