[TechAssist] Re: RCA CTC146L
- From: "al m" <ampm@xxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 30 Jul 2002 22:18:02 -0400
Make sure your sync pulse is getting back to the micro sync detect pin. I've
had one where it wouldn't autoprogram and the pulse was being lost thru a
capacitor.I bet it takes a long time to lock in to channels.
al marquardt
ampm@xxxxxxx
----- Original Message -----
From: "Tel-Tek Electronics" <teltek2@xxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, July 30, 2002 1:45 PM
Subject: [TechAssist] Re: RCA CTC146L
>
> I agree...but I'm not about to order these from Thomson's. Probably by the
> time I got them HDTV would be well established, and maybe cheaper then
> repairing this 20" Mono set. Hehe.
>
> -Ed-
> He'll just have to take it as is, I guess.
>
> Tel-Tek Electronics
> Midland, Ont. Canada.
> teltek2@xxxxxxxxxxxx
> teltek1@xxxxxxx
>
> "Quality will be remembered, long after Price is forgotten"
> ----- Original Message -----
> From: "Tel-Tek Electronics" <teltek2@xxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Tuesday, July 30, 2002 12:34 PM
> Subject: [TechAssist] Re: RCA CTC146L
>
>
> >
> > Have also done that...had scrap chassis..same problem.
> > Thanks Peggs.
> >
> > -Ed-
> > Tel-Tek Electronics
> > Midland, Ont. Canada.
> > teltek2@xxxxxxxxxxxx
> > teltek1@xxxxxxx
> >
> > "Quality will be remembered, long after Price is forgotten"
> > ----- Original Message -----
> > From: "peggs" <peggs@xxxxxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>; "AAAA TECH-ASSIST"
> > <techassist@xxxxxxxxxxxxx>
> > Sent: Tuesday, July 30, 2002 11:54 AM
> > Subject: [TechAssist] Re: RCA CTC146L
> >
> >
> > >
> > > The coils,AFT and Video Detect,will cause AFT 'locking' problems.
> > > you may need to replace both coils
> > >
> > >
> > >
> > > At 11:27 AM 7/30/02 -0400, Tel-Tek Electronics wrote:
> > > >
> > > >Have a 20" set here that will autoprogram, but does not lock any Ch.
> into
> > > >memory. Also when Cable is selected, by the time it has gone thru the
> > > >autoprogram function set has switched itself back to antenna. Have
> > changed
> > > >tuner, and adjusted L3232 for proper voltage. Still no go.When set is
> > > >switched back to Cable..all channels can be randomly accessed. Any
> ideas
> > on
> > > >this.
> > > > I realize we are working with a small "brainpool" this week, (not
> the
> > > >brain part ...but the pool).
> > > >
> > > >TIA
> > > >
> > > >-Ed-
> > > >Tel-Tek Electronics
> > > >Midland, Ont. Canada.
> > > >teltek2@xxxxxxxxxxxx
> > > >teltek1@xxxxxxx
> > > >
> > > >"Quality will be remembered, long after Price is forgotten"
> > > >
> > > >------------------------------------------
> > > >To REMOVE your email address, click here:
> > > > http://www.tech-assist.org/unsubb.html
> > > >To CHANGE your email address, click here:
> > > > http://www.tech-assist.org/change.html
> > > >------------------------------------------
> > > >***NEW*** Tips Added Instantly!!!***
> > > >Submit Repair Tips here:
> > > >http://www.tech-assist.org/secure/tip/
> > > >
> > > Peggs' Electronics
> > > 1519 West 2nd Street
> > > Owensboro,KY 42301
> > > ------------------------------------------
> > > To REMOVE your email address, click here:
> > > http://www.tech-assist.org/unsubb.html
> > > To CHANGE your email address, click here:
> > > http://www.tech-assist.org/change.html
> > > ------------------------------------------
> > > ***NEW*** Tips Added Instantly!!!***
> > > Submit Repair Tips here:
> > > http://www.tech-assist.org/secure/tip/
> > >
> > >
> >
> > ------------------------------------------
> > To REMOVE your email address, click here:
> > http://www.tech-assist.org/unsubb.html
> > To CHANGE your email address, click here:
> > http://www.tech-assist.org/change.html
> > ------------------------------------------
> > ***NEW*** Tips Added Instantly!!!***
> > Submit Repair Tips here:
> > http://www.tech-assist.org/secure/tip/
>
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.tech-assist.org/change.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
>
>
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.tech-assist.org/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
