Let's see, to lock in stations the micro needs to see an AFT or coincidence pulse appear for every station that's scanned, most likely that is not present at the micro. Damon Brunger damon101@xxxxxxxxxxxxxx Telrad Electronic Services Ft Wayne, IN 46815 ----- Original Message ----- From: "Tel-Tek Electronics" <teltek2@xxxxxxxxxxxx> To: "AAAA TECH-ASSIST" <techassist@xxxxxxxxxxxxx> Sent: Tuesday, July 30, 2002 10:27 AM Subject: [TechAssist] RCA CTC146L > > Have a 20" set here that will autoprogram, but does not lock any Ch. into > memory. Also when Cable is selected, by the time it has gone thru the > autoprogram function set has switched itself back to antenna. Have changed > tuner, and adjusted L3232 for proper voltage. Still no go.When set is > switched back to Cable..all channels can be randomly accessed. Any ideas on > this. > I realize we are working with a small "brainpool" this week, (not the > brain part ...but the pool). > > TIA > > -Ed- > Tel-Tek Electronics > Midland, Ont. Canada. > teltek2@xxxxxxxxxxxx > teltek1@xxxxxxx > > "Quality will be remembered, long after Price is forgotten" > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.tech-assist.org/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/