[TechAssist] Re: Question reguarding Panasonic VCRs
- From: "Shaun" <ssroark@xxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 21 Nov 2001 00:27:04 -0700
sometimes flux remover works but make sure you clean it off right afterwards
so it dosent eat glue off the heads
Shaun
----- Original Message -----
From: "Ernest Brewley" <radiodok@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, November 20, 2001 6:27 PM
Subject: [TechAssist] Re: Question reguarding Panasonic VCRs
>
> doc
> I do agree with a good cleaning I usually try a few times with head
cleaning
> fluid if no result I will try 409 (yes 409 household cleaner)just dry the
> drum after,as alast resort try contact cleaner.
> if one pickup is bad you will get a noisy picture sometime even a clear
band
> of picture at the bottom.
>
>
>
> >From: George Winters <littletiger67@xxxxxxxxx>
> >Reply-To: techassist@xxxxxxxxxxxxx
> >To: techassist@xxxxxxxxxxxxx
> >Subject: [TechAssist] Re: Question reguarding Panasonic VCRs
> >Date: Tue, 20 Nov 2001 12:59:46 -0800 (PST)
> >
> >
> > Howdy Wally,
> >If the heads are bad there won't be any video showing on the screen, if
you
> >have even and inch of video showing on the screen the heads are good,
clean
> >them again. I've had some vcrs unit in my shop that would have to be
> >cleaned 6 times to clean the heads out. Hope this help you.
> >George Winters Jr.
> >GLW CUSTOM ELECTRONICS
> >TN.
> > Jeff Dougherty <jeff@xxxxxxxxxxxxxxxxxx> wrote:
> >Wally,
> >If these things have the spongy self cleaners..this is more than likely
the
> >cause. What a sales gimmick!
> >
> >
> >Jeff
> >mailto:Jeff@xxxxxxxxxxxxxxxxxx www.9-11-2001tragedy.com
> >FAX 1-413-280-0677
> >Intrepid Video & Electronics
> >Harrisburg, PA 17111
> >717-909-8844
> >www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com
> >----- Original Message -----
> >From: "Wally Heise"
> >To:
> >Sent: Tuesday, November 20, 2001 1:39 AM
> >Subject: [TechAssist] Question reguarding Panasonic VCRs
> >
> >
> > >
> > > I now have about 4 Panasonic vcrs which all have what appears to be
bad
> > > video heads when you play. All of these vcrs are 1-4 years old and
> > > different model numbers. I don't have a video head tester to check the
> > > heads yet, (have not had a big need for one). I am wondering if others
> > > have seen a high failure rate with Panasonic video heads? Or is there
> > > something else I'm missing? Is there an easy method of determining if
a
> > > video head is defective, without the tester? Needless to say I have
> > > cleaned and cleaned the heads to no avail.
> > >
> > > Any help is greatly appreciated.
> > >
> > > Thank you
> > > Wally Heise
> > > South Isle Repair
> > > =================================
> > > Help make your TechAssist database better!
> > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> > > =================================
> > > To UNSUBSCRIBE your email address, click here:
> > > techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > >
> > >
> >
> >=================================
> >Help make your TechAssist database better!
> >Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> >=================================
> >To UNSUBSCRIBE your email address, click here:
> >mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> >
> >
> >
> >---------------------------------
> >Do You Yahoo!?
> >Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month.
> >
> >=================================
> >Help make your TechAssist database better!
> >Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> >=================================
> >To UNSUBSCRIBE your email address, click here:
> >mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> >
>
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
>
> =================================
> Help make your TechAssist database better!
> Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> =================================
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>
=================================
Help make your TechAssist database better!
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
=================================
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Other related posts:
