Sounds like a stuck relay Peggs At 11:27 AM 12/17/02 -0500, Edward Gaidies wrote: > >Sound goes off for a second then back. I tried changing Q433. Same result. >Have noticed the relay will periodically click of when in the off mode. May >have to try relay driver. Thanks. B+ is the same in both modes. Only >thing..in the off Mode I can not change channels or adjust volume up/down. > >-Ed- >----- Original Message ----- >From: "Gemini Computer & TV" <geminitv@xxxxxxxxxxxxxxxx> >To: <techassist@xxxxxxxxxxxxx> >Sent: Tuesday, December 17, 2002 10:42 AM >Subject: [TechAssist] Re: Philips Chassis 25P1-02 Model-PK4485 CH02 No Turn >Off. > > >> >> Ed, >> Does the sound go off when power button is depressed? How is the B+? The >> following are from WINSTIPS: >> >> --------------------------------------------------------------- >> Text pasted from WinSTIPS 2.0 >> http://www.ServiceSoftware.com >> --------------------------------------------------------------- >> >> PHILIPS P1 >> >> Power Off Inop (Set Stays On) >> >> Q433 Ecg123ap (Tests Good) Collector 9.1 V To Ground Turns Set Off >> >> --------------------------------------------------------------- >> >> PHILIPS P1 >> >> Power Off Inop (Set Stays On).. >> >> Cap'S >> >> Ic402, Photooptic Isolator (Ecg3041) 5303000001 >> >> --------------------------------------------------------------- >> >> PHILIPS P1 >> >> Power Off Inop. Sound Goes Off. Acts A Little Like Stuck Relay >> >> A Helper Elect >> >> Ic350 483520947009 Tmp47c634n2679 >> >> --------------------------------------------------------------- >> >> Bob Waterman, CET=AE #RI-28 >> Master Technician License #9109 >> Service Manager >> Gemini Computer, TV, & Security Alarms >> (508)695-7302 >> (508)695-7769 FAX >> geminitv@xxxxxxxxxxxxxxxx >> geminitv@xxxxxxx >> >> >> ----- Original Message ----- >> From: "Edward Gaidies" <teltek2@xxxxxxxxxxxx> >> To: <techassist@xxxxxxxxxxxxx> >> Sent: Tuesday, December 17, 2002 10:30 AM >> Subject: [TechAssist] Philips Chassis 25P1-02 Model-PK4485 CH02 No Turn >Off. >> >> >> > >> > Probably an easy fix for you Philips/Magnavox guys. >> > This set will not turn off. When Power Switch is made will change >> Channels, >> > when power switch is made again, will not. Looks like may be something >in >> > the stand by. >> > >> > TIA. >> > >> > -Ed- >> > Ed Gaidies >> > Tel-Tek Electronics >> > Ontario-Canada >> > >> > teltek2@xxxxxxxxxxxx >> > >> > ------------------------------------------ >> > Submit A Repair Tip For Everyone Here: >> > http://www.tech-assist.org/secure/tip/main.html >> > ------------------------------------------ >> > To REMOVE your email address, click here: >> > http://www.tech-assist.org/unsubb.html >> > To CHANGE your email address, click here: >> > http://www.techassist.net/forms/change.html >> > >> > >> >> ------------------------------------------ >> Submit A Repair Tip For Everyone Here: >> http://www.tech-assist.org/secure/tip/main.html >> ------------------------------------------ >> To REMOVE your email address, click here: >> http://www.tech-assist.org/unsubb.html >> To CHANGE your email address, click here: >> http://www.techassist.net/forms/change.html >> > >------------------------------------------ >Submit A Repair Tip For Everyone Here: >http://www.tech-assist.org/secure/tip/main.html >------------------------------------------ >To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html >To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > > Peggs' Electronics 1519 West 2nd Street Owensboro,KY 42301 270-926-4968 fax 270-686-7399 ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html