[TechAssist] Re: Philips Chassis 25P1-02 Model-PK4485 CH02 No Turn Off.
- From: "Edward Gaidies" <teltek2@xxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 17 Dec 2002 13:50:29 -0500
Fix for this was......
PHILIPS P1
Power Off Inop (Set Stays On)..
Ic402, Photooptic Isolator (Ecg3041) 5303000001.
Thanks to Winstips...and Bob for pointing me in the right direction. Problem
solved.
----- Original Message -----
From: "Gemini Computer & TV" <geminitv@xxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, December 17, 2002 10:42 AM
Subject: [TechAssist] Re: Philips Chassis 25P1-02 Model-PK4485 CH02 No Turn
Off.
>
> Ed,
> Does the sound go off when power button is depressed? How is the B+? The
> following are from WINSTIPS:
>
> ---------------------------------------------------------------
> Text pasted from WinSTIPS 2.0
> http://www.ServiceSoftware.com
> ---------------------------------------------------------------
>
> PHILIPS P1
>
> Power Off Inop (Set Stays On)
>
> Q433 Ecg123ap (Tests Good) Collector 9.1 V To Ground Turns Set Off
>
> ---------------------------------------------------------------
>
> PHILIPS P1
>
> Power Off Inop (Set Stays On)..
>
> Cap'S
>
> Ic402, Photooptic Isolator (Ecg3041) 5303000001
>
> ---------------------------------------------------------------
>
> PHILIPS P1
>
> Power Off Inop. Sound Goes Off. Acts A Little Like Stuck Relay
>
> A Helper Elect
>
> Ic350 483520947009 Tmp47c634n2679
>
> ---------------------------------------------------------------
>
> Bob Waterman, CET® #RI-28
> Master Technician License #9109
> Service Manager
> Gemini Computer, TV, & Security Alarms
> (508)695-7302
> (508)695-7769 FAX
> geminitv@xxxxxxxxxxxxxxxx
> geminitv@xxxxxxx
>
>
> ----- Original Message -----
> From: "Edward Gaidies" <teltek2@xxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Tuesday, December 17, 2002 10:30 AM
> Subject: [TechAssist] Philips Chassis 25P1-02 Model-PK4485 CH02 No Turn
Off.
>
>
> >
> > Probably an easy fix for you Philips/Magnavox guys.
> > This set will not turn off. When Power Switch is made will change
> Channels,
> > when power switch is made again, will not. Looks like may be something
in
> > the stand by.
> >
> > TIA.
> >
> > -Ed-
> > Ed Gaidies
> > Tel-Tek Electronics
> > Ontario-Canada
> >
> > teltek2@xxxxxxxxxxxx
> >
> > ------------------------------------------
> > Submit A Repair Tip For Everyone Here:
> > http://www.tech-assist.org/secure/tip/main.html
> > ------------------------------------------
> > To REMOVE your email address, click here:
> > http://www.tech-assist.org/unsubb.html
> > To CHANGE your email address, click here:
> > http://www.techassist.net/forms/change.html
> >
> >
>
> ------------------------------------------
> Submit A Repair Tip For Everyone Here:
> http://www.tech-assist.org/secure/tip/main.html
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
>
------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
Other related posts:
