The part# for this F.B. is 0LF04508F. Thanks. Jorge. ----- Original Message ----- From: Shoreline Electronics <jstielau@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, October 16, 2001 7:39 AM Subject: [TechAssist] Re: Panasonic CT-27G31U out of focus. > > What's the part number of the flyback for this model? > > Jeff Stielau > Shoreline Electronics Repair > 125 Beechtree Lane > Westbrook,CT 06498 > 860-399-1861 Voice > 860-664-3535 Fax > jstielau@xxxxxxxx > > ----- Original Message ----- > From: "Jorge Miret" <jmiret@xxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Monday, October 15, 2001 7:40 PM > Subject: [TechAssist] Panasonic CT-27G31U out of focus. > > > > > > Hi everyone ! > > I got this Panasonic Model CT-27G31U-Chassis AEDP272 that came out of > > focus.The first thing I did was to check the CRT Socket to see if it was > > corroded but it was OK.I replaced it anaway just in case but got no > > result.Sometimes I can get it to focus ok but suddenly it goes out of > focus > > by itself and if try to focus it again I cant get the spot to get it sharp > > enough,The problem is that this F.B. dont have a replacement and have to > be > > original and is really expensive.My question is there is something that > can > > be done to get the focus voltage from another source?.Forgive me for my > > ignorance but it came to my mind that probably somethig can still be done > to > > correct the focus? ;). > > Thanks for your help and I wait for any comment or idea. > > Bye now, > > Jorge Miret-Puerto Rico > > J.C.Video & P.C.Repair > > Tel:787-761-0920. > > jmiret@xxxxxxxx > > > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.