Hi everyone ! I replaced the F.B. but same problem (out of focus) I was able to focuse it ok but suddenly came out of focus again.To do the long story short,it turned out to be the CRT itself so gave back to cust. Thanks to all of you who help me on this and have a nice day, Jorge. ----- Original Message ----- From: Jorge Miret <jmiret@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, October 16, 2001 8:05 AM Subject: [TechAssist] Re: Panasonic CT-27G31U out of focus. > > The part# for this F.B. is 0LF04508F. > Thanks. > Jorge. > ----- Original Message ----- > From: Shoreline Electronics <jstielau@xxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Tuesday, October 16, 2001 7:39 AM > Subject: [TechAssist] Re: Panasonic CT-27G31U out of focus. > > > > > > What's the part number of the flyback for this model? > > > > Jeff Stielau > > Shoreline Electronics Repair > > 125 Beechtree Lane > > Westbrook,CT 06498 > > 860-399-1861 Voice > > 860-664-3535 Fax > > jstielau@xxxxxxxx > > > > ----- Original Message ----- > > From: "Jorge Miret" <jmiret@xxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Monday, October 15, 2001 7:40 PM > > Subject: [TechAssist] Panasonic CT-27G31U out of focus. > > > > > > > > > > Hi everyone ! > > > I got this Panasonic Model CT-27G31U-Chassis AEDP272 that came out of > > > focus.The first thing I did was to check the CRT Socket to see if it was > > > corroded but it was OK.I replaced it anaway just in case but got no > > > result.Sometimes I can get it to focus ok but suddenly it goes out of > > focus > > > by itself and if try to focus it again I cant get the spot to get it > sharp > > > enough,The problem is that this F.B. dont have a replacement and have to > > be > > > original and is really expensive.My question is there is something that > > can > > > be done to get the focus voltage from another source?.Forgive me for my > > > ignorance but it came to my mind that probably somethig can still be > done > > to > > > correct the focus? ;). > > > Thanks for your help and I wait for any comment or idea. > > > Bye now, > > > Jorge Miret-Puerto Rico > > > J.C.Video & P.C.Repair > > > Tel:787-761-0920. > > > jmiret@xxxxxxxx > > > > > > > > > Help make your TechAssist online repair tips > > > database better! Submit your fixes here: > > > http://www.circuitwork.com/techassist/tip/#tips > > > To unsubscribe write to: > > > techassist-request@xxxxxxxxxxxxx > > > with unsubscribe in the subject line. > > > > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.