Bruce, I am sending a block diagram of HV that may help. It is for the P2...which I think is what you have. Jeff FAX 717-564-4952 Intrepid Video & Electronics 501 Luther Rd Harrisburg PA 17111-2055 Be careful of your thoughts. They may become your words any moment. Order your tip CD today. Filled with TV, VCR, camcorder tips and more. Version 3.0, ready, with more tips, user friendly program. $49.00 for CD, plus first year of tip updates. sales@xxxxxxxxxxxxxxx for more info www.tech-repair.net www.intrepid-video.com www.thetoolcaddy.com www.9-11-2001tragedy.com ******************************************************************** ----- Original Message ----- From: "Bruce Youmans" <youmans@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, September 26, 2002 2:51 PM Subject: [TechAssist] Re: Panasonic CT-2011SV, No Vertical, Parts ID I have changed R552 which was open and shorted D561, as well as vertical IC LA7835. Still no vertical sweep. Have checked all capacitors and diodes in vertical circuit. All check good. Yoke ?? There is 24 volts on VCC of vertical IC. Does someone have a schematic of the vertical circuit then can email/fax me? Thanks. Bruce Bruce's TV Service Sierra Vista, Arizona youmans@xxxxxxxx ----- Original Message ----- From: Don Hartigan <hartstv@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, September 17, 2002 4:01 PM Subject: [TechAssist] Re: Panasonic CT-2011SV, No Vertical, Parts ID > > Bruce,most of these Vert cct use a 1 or 2 ohm resistor & a hi speed > switching diode,ECG 577 or 588 to supply the VCC for the Vert i/c.Of course > you may also have to replace the IC as well.Can't help you on C457,567...Don > HARTS-TVCR''ASC'' > 9 Robert St.,Oromocto,NewBrunswick,Can > E2V 3N2 > Tel#506-357-9785,Fax#506-357-6010 > hartstv@xxxxxxxxxxx > ----- Original Message ----- > From: "Bruce Youmans" <youmans@xxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Tuesday, September 17, 2002 1:39 AM > Subject: [TechAssist] Panasonic CT-2011SV, No Vertical, Parts ID > > > > Manufavturer: Panasonic > > Model: CT-2011SV > > Chassis: AMEDP289 > > Symptom: No Vertical Sweep > > > > Need parts ID (value and/or part number) for; > > R552 > > D561 > > > > I do not have the schematic and the circuit trace is difficult to follow. > It would also help to know the electrolytic capacitor board reference number > for this scan derived supply. I think it may be C457 or C567. > > > > Thanks. > > > > Bruce > > Bruce's TV Service > > Sierra Vista, Arizona > > > > ------------------------------------------ > > To REMOVE your email address, click here: > > http://www.tech-assist.org/unsubb.html > > To CHANGE your email address, click here: > > http://www.techassist.net/forms/change.html > > ------------------------------------------ > > ***NEW*** Tips Added Instantly!!!*** > > Submit Repair Tips here: > > http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/