Bruce,most of these Vert cct use a 1 or 2 ohm resistor & a hi speed switching diode,ECG 577 or 588 to supply the VCC for the Vert i/c.Of course you may also have to replace the IC as well.Can't help you on C457,567...Don HARTS-TVCR''ASC'' 9 Robert St.,Oromocto,NewBrunswick,Can E2V 3N2 Tel#506-357-9785,Fax#506-357-6010 hartstv@xxxxxxxxxxx ----- Original Message ----- From: "Bruce Youmans" <youmans@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, September 17, 2002 1:39 AM Subject: [TechAssist] Panasonic CT-2011SV, No Vertical, Parts ID > Manufavturer: Panasonic > Model: CT-2011SV > Chassis: AMEDP289 > Symptom: No Vertical Sweep > > Need parts ID (value and/or part number) for; > R552 > D561 > > I do not have the schematic and the circuit trace is difficult to follow. It would also help to know the electrolytic capacitor board reference number for this scan derived supply. I think it may be C457 or C567. > > Thanks. > > Bruce > Bruce's TV Service > Sierra Vista, Arizona > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/