Yes a scan of that circuit should be similar, would appreciate it. thanks Bruce. ----- Original Message ----- From: "Old TV Man" <mebonnell@xxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, August 05, 2004 1:22 PM Subject: [TechAssist] Re: Mitsubishi CS2657 (TM3-A-C57R) Print? > Bruce I have a Mitsubishi CK-2604R that uses the LA7836. > If you want me to scan it let me know. > > Max Bonnell > Bonnell TV > Robinson, IL > > > > Sender: techassist-bounce@xxxxxxxxxxxxx From: > btied@xxxxxxxxxxxx(Bruce=A0Tiedeman) Date: Thu, Aug 5, 2004, 1:03pm > (CDT+1) To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Mitsubishi > CS2657 (TM3-A-C57R) Print? Reply=A0to: techassist@xxxxxxxxxxxxx > > Looking for a print of the Vertical section in this set. It uses LA7836 > output. The traces are damaged and I need to confirm hook up. In > question is Pin 13, looks like it might hook up to pin 11 but am not > sure. Also there is a zener diode I suspect is bad, Location D410 > (5DO9). The anode goes to pin 4 and Cathode to pin 1. There is only 1.5 > volts on pin 1. thanks for any help, > > Bruce. > B&T Electronics > 139 Margaret St > Sarnia Ontario > Canada > N7T 2Y3 > 519 344 1850 > ---------------------------------------------- > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/