Looking for a print of the Vertical section in this set. It uses LA7836 output. The traces are damaged and I need to confirm hook up. In question is Pin 13, looks like it might hook up to pin 11 but am not sure. Also there is a zener diode I suspect is bad, Location D410 (5DO9). The anode goes to pin 4 and Cathode to pin 1. There is only 1.5 volts on pin 1. thanks for any help, Bruce. B&T Electronics 139 Margaret St Sarnia Ontario Canada N7T 2Y3 519 344 1850 ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/