Hello Everybody, I recently found out that the new Phillips/Magnavox TVs have made their recessed 1/4" screw holes so tight that none of my 1/4" nutdrivers will fit into the holes. My boss even suggested removing my bit and trying to use only the Versa-pak shank - way too large! I had an Xcelite PS 120 kit that had a hollow shaft 1/4" nutdriver that was the only nutdriver that would fit (CTC 169 has really tight screw holes on the back video cover too). Well.....I lost that months ago. Who out there has run into this situation, and who out there has one of the 1/4" hollow shaft nutdrivers that can verify if it fits the Magnavox units? More info: The PS 120 kit consists of hollow shaft nutdrivers that are no more than 3-4" long (mini nutdrivers). The Phillips/Magnavox Model is MS 3650, and the chassis is 36M800, which is a 36" TV with a very slim cabinet wrapped around the crt. (No wonder they have stingy recessed holes, eh?) If anyone can verify these nutdrivers work I'll pay for another kit, or if you have a brand name tool or a source for a thin walled 1/4" nutdriver....you may want to post your info as I believe we'll all be seeing this design change on future sets. Thanks for your info and time Damon Brunger damon101@xxxxxxxxxxxxxx Telrad Electronic Services Ft Wayne, IN 46815 Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.