hi jim & phil, had same problem about a year ago...purchased philips remote 483521917656 i think it was like 65.00.. it has two smart buttons???? to lock eprom settings.. it worked and have only used it once...expensive settings, hahah bob bobs tv... worcester, ma ----- Original Message ----- From: Phillip R. Hull <phil245@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, March 28, 2002 3:30 PM Subject: [TechAssist] Re: Magnavox MS3650C129 & MS3250C121, M8 chassis option bytes > > What is the part # of the factory remote? > Phillip R Hull > phil245@xxxxxxxxxxxxx > ----- Original Message ----- > From: "Jim Myers" <jr.myers@xxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Thursday, March 28, 2002 3:09 PM > Subject: [TechAssist] Magnavox MS3650C129 & MS3250C121, M8 chassis option > bytes > > > > > > Hi all, I have two Magnavox sets, M8 chassis with same problem of the A/V > > input not working. I'm sure the problem is incorrect data in the option > > bytes, I have the Factory Mode Remote and the instructions and have the > > "correct" option byte data from Philips entered and saved. I also have a > > third set, new just out of the box with no problems, same model and > chassis. > > Checking the option bytes in the working new set I find the data is not > only > > different but also not listed in the FMR instructions, no way to enter the > > data that is there. > > Details, Model MS3650C129 option bytes in the set with the A/V problem is > > 000 087 129 162 196 024 000 and is correct per Philips. > > New set same model, A/V input works 000 215 129 162 164 088 000. The FMR > > remote is not capable of entering this data. Philips does not have the > > answer, does anyone here have it? This set does not have the SAM, CAM etc > > the only was to access service mode is with the FMR. > > Thanks > > Jim Myers > > Telrad Electronic Services Co. > > Fort Wayne, IN 46815 > > jr.myers@xxxxxxxxxxx > > 260-432-4486 Fax and Voice > > Fax is always on > > > > ------------------------------------------ > > Make your TechAssist database better! > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > > > > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.