[TechAssist] Re: Magnavox MS3650C129 & MS3250C121, M8 chassis option bytes


Could be, but it's on back order.
Jim Myers
Telrad Electronic Services Co.
Fort Wayne, IN 46815
jr.myers@xxxxxxxxxxx
260-432-4486 Fax and Voice
Fax is always on
----- Original Message -----
From: "Ralph Dorsey Atlas TV Milwaukee, WI" <Merlin-Wizard@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, March 28, 2002 10:07 PM
Subject: [TechAssist] Re: Magnavox MS3650C129 & MS3250C121, M8 chassis
option bytes



Bad Eprom maybe?

Ralph Dorsey
Atlas TV Inc.
3945 s 76th St.
Milwaukee.Wi 53220
414-545-2303



Jim Myers wrote:

>That's the same information I have from Philips except for OB7 which is 000
>and the FMR remote has no settings in the instructions to set OB7 to
>anything other than 000. Also note the new set which works has option bytes
>of 000 215 129 162 164 088 000, the FMR will not set OB2 to 215, OB5 to 164
>or OB6 to 088.
>Jim Myers
>Telrad Electronic Services Co.
>Fort Wayne, IN 46815
>jr.myers@xxxxxxxxxxx
>260-432-4486 Fax and Voice
>Fax is always on
>----- Original Message -----
>From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx>
>To: <techassist@xxxxxxxxxxxxx>
>Sent: Thursday, March 28, 2002 4:16 PM
>Subject: [TechAssist] Re: Magnavox MS3650C129 & MS3250C121, M8 chassis
>option bytes
>
>
>
>lets try it again
>
>MS3250C121
>
>00
>87
>129
>162
>196
>152
>64
>
>MS3650c129
>
>00
>87
>129
>162
>196
>24
>64
>
>Phillip R Hull
>phil245@xxxxxxxxxxxxx
>----- Original Message -----
>From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx>
>To: <techassist@xxxxxxxxxxxxx>
>Sent: Thursday, March 28, 2002 4:10 PM
>Subject: [TechAssist] Re: Magnavox MS3650C129 & MS3250C121, M8 chassis
>option bytes
>
>
>>Its in the Force 32 program if you loaded the manuals,
>>
>>MS3250C121                                                 MS3650C129
>>
>>OB1       00                                                    OB1
>>00
>>OB2        87                                                   OB2
>>87
>>OB3        129                                                 OB3
>>129
>>OB4        162                                                OB4
>>
>162
>
>>OB5        196                                                OB5
>>
>196
>
>>OB6        152                                                OB6
>>
>24
>
>>OB7        64                                                  OB7
>>
>64
>
>>Phillip R Hull
>>phil245@xxxxxxxxxxxxx
>>----- Original Message -----
>>From: "Jim Myers" <jr.myers@xxxxxxxxxxx>
>>To: <techassist@xxxxxxxxxxxxx>
>>Sent: Thursday, March 28, 2002 3:09 PM
>>Subject: [TechAssist] Magnavox MS3650C129 & MS3250C121, M8 chassis option
>>bytes
>>
>>
>>>Hi all, I have two Magnavox sets, M8 chassis with same problem of the
>>>
>A/V
>
>>>input not working. I'm sure the problem is incorrect data in the option
>>>bytes, I have the Factory Mode Remote and the instructions and have the
>>>"correct" option byte data from Philips entered and saved. I also have a
>>>third set, new just out of the box with no problems, same model and
>>>
>>chassis.
>>
>>>Checking the option bytes in the working new set I find the data is not
>>>
>>only
>>
>>>different but also not listed in the FMR instructions, no way to enter
>>>
>the
>
>>>data that is there.
>>>Details, Model MS3650C129 option bytes in the set with the A/V problem
>>>
>is
>
>>>000 087 129 162 196 024 000 and is correct per Philips.
>>>New set same model, A/V input works 000 215 129 162 164 088 000. The FMR
>>>remote is not capable of entering this data. Philips does not have the
>>>answer, does anyone here have it? This set does not have the SAM, CAM
>>>
>etc
>
>>>the only was to access service mode is with the FMR.
>>>Thanks
>>>Jim Myers
>>>Telrad Electronic Services Co.
>>>Fort Wayne, IN 46815
>>>jr.myers@xxxxxxxxxxx
>>>260-432-4486 Fax and Voice
>>>Fax is always on
>>>
>>>------------------------------------------
>>>Make your TechAssist database better!
>>>Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
>>>------------------------------------------
>>>To UNSUBSCRIBE your email address, click here:
>>>mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>>>Or send a BLANK email with unsubscribe in the
>>>SUBJECT field to the address above.
>>>
>>>
>>------------------------------------------
>>Make your TechAssist database better!
>>Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
>>------------------------------------------
>>To UNSUBSCRIBE your email address, click here:
>>mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>>Or send a BLANK email with unsubscribe in the
>>SUBJECT field to the address above.
>>
>>
>
>------------------------------------------
>Make your TechAssist database better!
>Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
>------------------------------------------
>To UNSUBSCRIBE your email address, click here:
>mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>Or send a BLANK email with unsubscribe in the
>SUBJECT field to the address above.
>
>
>
>------------------------------------------
>Make your TechAssist database better!
>Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
>------------------------------------------
>To UNSUBSCRIBE your email address, click here:
>mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>Or send a BLANK email with unsubscribe in the
>SUBJECT field to the address above.
>
>

--




------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.



------------------------------------------
Make your TechAssist database better!  
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.

Other related posts: