Something I just noticed C432 (100 mfd 200 Volt) is getting fairly warm so I replaced with another new one and that one is getting pretty warm also. I also replaced the regulator STR30130 and still no help. Shaun Advanced Electronics 224 West Riverview Ave. Fort Morgan, CO 80701 ----- Original Message ----- From: "Shaun" <satguy@xxxxxxxxxxxxx> To: "tech" <techassist@xxxxxxxxxxxxx> Sent: Monday, August 29, 2005 7:25 PM Subject: [TechAssist] Magnavox CS4535A101 Chassis 25S104-00AA picture distorting > This set has a strange picture wiggle only on the left side and only after > it warms up and usually only with a bright screen or words on the screen. I > replaced the C432 100 mfd 200 volt and I replace Q510 because when heated it > caused the picture to distort. No help so I am assuming it is something near > Q510. Has anyone seen this before? > > Shaun > > Advanced Electronics > 224 West Riverview Ave. > Fort Morgan, CO 80701 > > -------------------------------------------------------------------------- --- > This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/