[TechAssist] Re: [Fwd: Need RCA Chipper -Check questions answered]
- From: Ralph Dorsey <Merlin-Wizard@xxxxxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Tue, 30 Oct 2001 19:16:31 -0600
Phill is correct,,i should have said that earlier thought most of the techs
had heard this already,,,as usual i ASSUMED (ass of u and me) that they
already tried that.
"Phillip R. Hull" wrote:
> I would not reset the eeprom on a CTC203 with no audio, this is not the
> same problem that the other older CTC's had. Usually unpluging the set a
> couple of hours resets the audio on the CTC203, if not further
> troubleshooting is required.
> The info I have heard is a certain TV network sends a radom bit of info
> that locks the mute in the micro.
> Phillip R Hull
> phil245@xxxxxxxxxxxxx
> ----- Original Message -----
> From: "Phil Bader" <philbad@xxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Tuesday, October 30, 2001 7:05 AM
> Subject: [TechAssist] [Fwd: Need RCA Chipper -Check questions answered]
>
> >
> >
> >
> > -------- Original Message --------
> > Subject: Need RCA Chipper -Check questions answered
> > Date: Tue, 30 Oct 2001 07:04:49 -0500
> > From: Phil Bader <philbad@xxxxxxxxxx>
> > Organization: Jan Phyl TV Inc. Winter Haven, Fl. Estab. 1976
> > To: "CONSUMERELREPAIR-L@xxxxxxxxxxxxxxxxxxxx"
> > <CONSUMERELREPAIR-L@xxxxxxxxxxxxxxxxxxxx>
> >
> > I think I need this device,but I called my distributor and there's two
> > versions. The RCLTA1BOX2A @ $119.95 and the "RCL chipper check" with
> > "interface box" @ $239.90. First, why would I buy one without this
> > interface box.They really could not explain the difference between the
> > two units they are selling. The distrib. could not help me as to exactly
> > what I need to order to ,for example reset the eeprom on a CTC203 with
> > no sound. Do you always need a PC attached? A very basic explaination is
> > needed.Assume I know nothing! What exactly do I ask for? TIA, Phil
> > Help make your TechAssist online repair tips
> > database better! Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with unsubscribe in the subject line.
> >
> >
>
> Help make your TechAssist online repair tips
> database better! Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with unsubscribe in the subject line.
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
